Cindi Mayweather
Member
Will have to stick to black joystick because I can't find any white Hayabusa's.
Super "NeoGAF Arcade Stick Thread" II TURBO
- Thread starter MarkMan
- Start date
Will have to stick to black joystick because I can't find any white Hayabusa's.
LincolnTunnel
Member
FocusAttack mentioned like a week ago on their facebook page that they were working on a larger order of Hayabusa Octopus plates for arcadeworlduk.com. Doesn't look like they're available yet, but I assume they should be soon. That's probably your only real option because FocusAttack actually manufactures those Octogates themselves in house.
BulletBees
Member
Got my Ryu TE2+ today. I had a hell of a time getting the wires disconnected from the buttons. Didn't have as much trouble with my Atrox when I replaced those.
I spray painted the red outer part of the stick (Goes outside the plexi. Cannot think of what to call it for some reason) black to match my new art that is arriving tomorrow.
I'll be sure to post pictures of the finished product.
I spray painted the red outer part of the stick (Goes outside the plexi. Cannot think of what to call it for some reason) black to match my new art that is arriving tomorrow.
I'll be sure to post pictures of the finished product.
TonberrysKnife
Member
Brook converters are EVO approved and legal. Not sure where you heard them being banned.
There's a switch on the QDs that you press and they slide right off.
BulletBees
Member
Hold up. Seriously? Ugh. Wish I knew that. Ha. Oh well!
Camp1nCarl
Member
Will have to stick to black joystick because I can't find any white Hayabusa's.
Color shouldn't be that big of a deal initially. Just paint whatever color you get white, then your free to paint it whatever color/shade you want.
MisterLuffy
Member
I got my TES+ today, looks great.
Rabid Dwarf 76
Member
Will have to stick to black joystick because I can't find any white Hayabusa's.
Just change the shaft cover and dust cover to white ones.
Also I love your design! Super cute!
Awesome. You thought of using this dust washer: http://www.focusattack.com/jlf-alu-series-shaft-dustwasher-set-hot-pink/
Will have to stick to black joystick because I can't find any white Hayabusa's.
I actually just used a white shift cover for my Hayabusa, so it's now technically a white Hayabusa
Switch main pcbs, which will require soldering. You have to know the wires for start, select, and home on rap4 main pcb and Q4 secondary pcb so you can connect them together. You will lose touch pad functions.
Thanks for the reply, I might just ending up doing that tomorrow. From what I can tell losing the touchpad function shouldn't bother me.
To anyone who wants to try the MC cthulhu/ Brook UFB dual mode through Imp v2 and wants to play SFV, here is a note. When plugging a stick in the ps4 while SFV is active, force the Imp v2 to select the UFB. Force mode is done by holding lk, MP, hk while plugging the stick in the ps4. If the fight stick is not in forced mode while plugging the stick in, SFV will automatically detect the MC Cthulhu pcb first. Nothing will happen until legacy option is turn on at that point.
JebaÄBiedÄ
Banned
Looking for a stick for my PC. Is this razer much worse than its more expensive brother?
Cindi Mayweather
Member
Nah, I actually like it being black. Nice contrast. And makes the stick pop.
Codiox
Member
Get the Venom Arcade Stick (Amazon.com) and mod the stick and buttons. Payed round about 150$ for it (converted from euro)
This one is mine today:
Used a LS-58 Seimitsu stick with octo gate, 6x Sanwa OBSF-30 buttons and 2x Seimitsu (dont know the exact type) buttons.
It is ps3/ps4/PC compatible.
brooklyniteOne
Member
Wanted to try out the Brook universal PCB and ended up changing out the art to this:
The art is from the SF4 brooklyn nyc launch event. FGC. Launch day. yeah. lol
The art is from the SF4 brooklyn nyc launch event. FGC. Launch day. yeah. lol
BulletBees
Member
Alright! Here it is! Pretty happy with how it turned out. Can't wait to start using it.
Crimefighter
Neo Member
When hooked to a PC, is it xinput, directinput or are you using a third party app?
MisterLuffy
Member
Alright! Here it is! Pretty happy with how it turned out. Can't wait to start using it.
That looks cool. When changing the art, did you have to cut the button layouts yourself or have someone do it?
brooklyniteOne
Member
You can use a compass cutter like this one to cut an accurate circle for the button holes.
DeathByBacklog
Member
Never even knew such a thing existed.
BulletBees
Member
I had the guys at Tek Innovation's cut it for me. Same with the plexi. They do great work!
BrettWeir
Member
Wanted to try out the Brook universal PCB and ended up changing out the art to this:
The art is from the SF4 brooklyn nyc launch event. FGC. Launch day. yeah. lol
Holy hell. Is that a Finkle?
brooklyniteOne
Member
yessir. his work is amazing.
Stallion Dan
Member
Cool to know, thanks for that. After messing around with SFV earlier though I ended up swapping my HRAP4K hayabusa for the Sanwa JLF in my old MC TE1, which I put a octo on years ago. Just cannot get on with a square gate, I always end up jumping when don't mean to. Will order a octo for hayabusa and swap them back when can get one.
BrettWeir
Member
Hell yeah. When I was making sticks, I always envied his work with metals. Back then, there weren't many stick makers. Finkle, Kaytrim, myself ... and I can't remember a couple.
Finkle's were/are gorgeous.
Hellshingu
Member
Just got my TE2+ and this thing is nice. Don't have squeaky hinges but the case can creak a little if you try to flex it (which you shouldn't be doing anyways). Feels very sturdy and well built.
Going to have to get used to the sanwa parts again as I have been using the Hayabusa stick for the last ~9 months and I love that thing. Anyone successfully got a Hayabusa working in one of these yet?
Going to have to get used to the sanwa parts again as I have been using the Hayabusa stick for the last ~9 months and I love that thing. Anyone successfully got a Hayabusa working in one of these yet?
CrashPrime
Member
So right now I have a good collection of "OK" sticks but I want something to take their place.
1) MadCatz SFIV FightStick 360
2) HORI Fight Stick 3 PS3
3) MadCatz SFIV Tournament Edition Round 1 PS3
4) Tatsunoko vs Capcom FightStick Wii
5) Agetec Green Goblin DC
I want a 2p panel (that looks like the Astro City Cab panel) that works on PS3, PS4, and PC at this point. I don't do 360 at all anymore (RIP Ikaruga/Radiant Silvergun).
I basically do all my saturn/dc stuff via PC these days.
What is out there for 2p sticks? I've seen "Blaze" sticks that seem like they have a workable shell to make a 2p stick. I've seen the HSS-0130 Saturn sticks that basically ARE astro cabs (I want, but I can't canibalize a $400 stick).
There are the MadCatz V.s. sticks that can bolt together .. $400 for that package.
Am I in the realm of custom only? The HORI Rap4 VLX sticks seem so nice but $300 for 1 player. I want 2p!
1) MadCatz SFIV FightStick 360
2) HORI Fight Stick 3 PS3
3) MadCatz SFIV Tournament Edition Round 1 PS3
4) Tatsunoko vs Capcom FightStick Wii
5) Agetec Green Goblin DC
I want a 2p panel (that looks like the Astro City Cab panel) that works on PS3, PS4, and PC at this point. I don't do 360 at all anymore (RIP Ikaruga/Radiant Silvergun).
I basically do all my saturn/dc stuff via PC these days.
What is out there for 2p sticks? I've seen "Blaze" sticks that seem like they have a workable shell to make a 2p stick. I've seen the HSS-0130 Saturn sticks that basically ARE astro cabs (I want, but I can't canibalize a $400 stick).
There are the MadCatz V.s. sticks that can bolt together .. $400 for that package.
Am I in the realm of custom only? The HORI Rap4 VLX sticks seem so nice but $300 for 1 player. I want 2p!
Yes.
Codiox
Member
I don't know, it just works. USB into the laptop, start usf4 and it works.
Crimefighter
Neo Member
If it has the 8-minute authentication issue and has to be unplugged every round, then these are really annoying in tournaments and absolutely should be banned.
MisterLuffy
Member
One more question. If I want to change my art, where do I find a template for TES+ to make sure that the layout is in place?
Cindi Mayweather
Member
Shadow Soldier got the stick today.
Tried it out, and I really like the Hayabusa. It's REALLY sensitive..
I find myself doing weird inputs. Like, I'll do a hadouken and it'll have like an extra input. Really need help when I get my TES+ on ironing out stuff like that. I guess all I can do is keep doing moves and correct the inputs.
Not fond on the Kuro buttons but they're bad. I like my buttons to click when pressed and these don't really make a sound unless you mash them hard. Not bad though, but a bit loose for my taste.
The stick is really sturdy and comfortable even for little 5'5 150 pound me. Doesn't sit too high and I love the pads on the bottom. Nice and comfy over here.
Shipping to your place asap. I think you'll like it a lot!
Tried it out, and I really like the Hayabusa. It's REALLY sensitive..
I find myself doing weird inputs. Like, I'll do a hadouken and it'll have like an extra input. Really need help when I get my TES+ on ironing out stuff like that. I guess all I can do is keep doing moves and correct the inputs.
Not fond on the Kuro buttons but they're bad. I like my buttons to click when pressed and these don't really make a sound unless you mash them hard. Not bad though, but a bit loose for my taste.
The stick is really sturdy and comfortable even for little 5'5 150 pound me. Doesn't sit too high and I love the pads on the bottom. Nice and comfy over here.
Shipping to your place asap. I think you'll like it a lot!
Battle_Scarred Shogun
Neo Member
the tek innovation guys have templtes and madcatz has templates on their site IIRC
CrashPrime
Member
So when it comes to a 2p shell, am I better off building a Kraylix style cabinet or does anyone have a recommendation for a builder who could do a 2p stick?
If you want the Sega panel...buy one, then build around that. Hell if I know where to get them or how much they are now, but I got a Blast City panel way back for $150-200 I think. Came with JLFs and OBSF-RG buttons and arcade wiring (which you could snip and strip at the end to do your own thing). Build a box or cut a hole in a table (I've seen that somewhere) and there you go!
Edit: looks like Jasens Customs makes reproductions for $100:
http://www.jasenscustoms.com/Sega-2L12B-Panels--ASTRO-CITY_p_105.html
Pricey once you factor in the sticks and buttons but comparable enough.
CrashPrime
Member
Sticks & buttons don't concern me, its just that I dont have anything to drop the panel in to. I would still need some kind of enclosure right?
Yeah...with varying degrees of difficulty depending on how nice you want to make it (Lindbergh panels would be easier to work with being square). Probably be easier to find (or build) a long box and drill holes than making an enclosure for a panel now that I think about it.
notworksafe
Member
The stick itself isn't terrible, but for the price it really isn't worth it.
The old SF4 SE was a bad stick but it was easy to step up and mod it with real parts once you got comfortable with the idea of using a stick. That isn't really an option with the Alpha. Depending what system you want to play on you're better off getting an old 360 stick (PC) or just biting the bullet and spending the cash on a HRAP4 or similar (PS4).
sixteen-bit
Member
Wanted to try out the Brook universal PCB and ended up changing out the art to this:
The art is from the SF4 brooklyn nyc launch event. FGC. Launch day. yeah. lol
this is an awesome stick
. 