NeoGAF Arcade Stick Thread

Status
Not open for further replies.
BOTEC said:
I want the PS3 one. :(

@Moofers:

A Phillips head screw driver, and some parts.
Click to expand...
Not sure if you're in the US or not, but the Brawl Sticks are $29.99 in store at GameStop, PS3 & 360. None near me which is too bad since I'd like a PS3 stick too!

Does anyone have any good pictures of the Dark Blue Sanwa buttons? I'm thinking of using them in the mod I'm doing on my TE, but the colors look soooo different from picture to picture. I don't want purple.
 
The PS3 and 360 Brawl sticks are only $30 now at Gamestop, and the Wii TvC stick is supposed to be $20. I picked up the last PS3 stick at a store near me.
 
rivals said:
I can assure you this is not the case.
Click to expand...
Ever heard of hyperbole? But seriously, in the US, you're lucky to find a couple of old Marvel 2 machines with half-functioning controls wedged between all the lightgun games and claw machines. And that's if you even still have a local arcade. If you want a place where the "arcade scene" hangs on by a lifeline, you gotta go to Japan or SE Asia.
 
Lambtron said:
Not sure if you're in the US or not, but the Brawl Sticks are $29.99 in store at GameStop, PS3 & 360. None near me which is too bad since I'd like a PS3 stick too!

Does anyone have any good pictures of the Dark Blue Sanwa buttons? I'm thinking of using them in the mod I'm doing on my TE, but the colors look soooo different from picture to picture. I don't want purple.
Click to expand...

I'm not sure how much a help a picture would be, as you said they vary wildly. This is due to differences in lighting, camera sensors, and monitor settings. Be aware in person, they're indigo.
 
Jagernaut said:
The PS3 and 360 Brawl sticks are only $30 now at Gamestop, and the Wii TvC stick is supposed to be $20. I picked up the last PS3 stick at a store near me.
Click to expand...

In Canada Fight Sticks are notoriously over priced & hard to find compared to the US, so getting it for $50 was awesome. In recent years its become a bit easier than lets say pre-MVC3 era, but you'll never find a stick going for under $50, and even under $80 is extremely rare. I've been both lucky and patient to get the sticks I've gotten for the prices I have.
 
I know I'd need a screwdriver and parts, thanks guys. This ain't my first rodeo. What I meant was that I'd never modded a Wii stick before, so I have no idea if there's like some specific boards you'd need for those. I've only used ChimpSMD before and am familiar with TEasy and Kitty, but those are all for TE's that are 360 to PS3.
 
Moofers said:
I know I'd need a screwdriver and parts, thanks guys. This ain't my first rodeo. What I meant was that I'd never modded a Wii stick before, so I have no idea if there's like some specific boards you'd need for those. I've only used ChimpSMD before and am familiar with TEasy and Kitty, but those are all for TE's that are 360 to PS3.
Click to expand...

You'd have to ask Toodles to be sure but I imagine none of the drop-in solutions designed for 360 will work on the Tatsunoko. You're probably looking at a complete PCB swap to something like the Multi-Console Cthulhu if you're after getting it to work on other consoles.

Alternatively, there exist adapters that convert the classic controller pinout (which I think the Tatsunoko uses) to USB for PC use. No idea if the output is HID-compliant or works on the PS3 though.
 
Jagernaut said:
The PS3 and 360 Brawl sticks are only $30 now at Gamestop, and the Wii TvC stick is supposed to be $20. I picked up the last PS3 stick at a store near me.
Click to expand...

That's a great price! But then I'd have to forever live with the shame of being seen walking into a Gamestop, AND walking out with something that has wrestlers plastered all over it. I don't know if I'm up to that.
 
So how insane is arcade stick GAF?
Or, more specifically, would anyone be interested in a "unibody" (milled from a single piece of aluminum) panel/box?

I got the idea recently that this would be pretty awesome, but the cost if you only order a single one is just too much even as an enthusiast. (288 USD without shipping for my current design) It goes down relatively quickly with volume though.
 
BOTEC said:
That's a great price! But then I'd have to forever live with the shame of being seen walking into a Gamestop, AND walking out with something that has wrestlers plastered all over it. I don't know if I'm up to that.
Click to expand...

Considering the price of the stick and also the fact that you can burn the box and rip off the artwork I'd say it's still worth it.
 
BOTEC said:
That's a great price! But then I'd have to forever live with the shame of being seen walking into a Gamestop, AND walking out with something that has wrestlers plastered all over it. I don't know if I'm up to that.
Click to expand...

Hah. That WWE branding is why they are so cheap. I got a couple of fight pads for $20 each too (my brother in the US got them for me). That being said, I'd love to replace the artwork on the stick with something more tasteful.
 
Durante said:
So how insane is arcade stick GAF?
Or, more specifically, would anyone be interested in a "unibody" (milled from a single piece of aluminum) panel/box?

I got the idea recently that this would be pretty awesome, but the cost if you only order a single one is just too much even as an enthusiast. (288 USD without shipping for my current design) It goes down relatively quickly with volume though.
Click to expand...

I'd definitely be interested, although it really depends on what it looks like. D:
 
Yes Boss! said:
Big sticks are good! As are small sticks. Who carries around a VLX, Twinstick or that big Saturn dual thingy? We've already got like a hundred medium sticks to choose from.

For the new page:

Ok guys and gals, here is the competition:

Prize:

One Street Fighter X Tekken V.S. stick for either 360 or PS3, your choice. Whenever it ships.

VS.jpg


OR

Namco Store Black PS3 TE stick (if it is still available after 15 February, 2012; but I'll probably order one in the coming week if it looks like we are getting entries...so if the winner opts for it they can take it, otherwise it will just go into my collection)

namco.jpg


---> Choice of stick is negotiable, say, if you wanted a qanba or eightarc or even the cheaper Fightstick Pro Black version instead but I'd rather keep it Mad Catz since MarkMan started this thread. Just try to keep it $200-ish.

Who can enter?

Any GAF member from any country. I currently live in the middle east but depending on the winner's location it will either ship directly from the US manufacturer/US amazon/US Club Namco Store or I'll have the stick sent to my CA address then have it forwarded to your address...in other words, it might take a few extra days to arrive if you live outside the US.

How to enter:

First, you will need some type of arcade stick and some type of camera/phone camera. Be creative and photograph the stick (or sticks) in some type of creative location, juxtaposition, etc. Try to surprise. Photography skills are not really important, creativity is! Feel free to manipulate the image however you feel...JUST DON'T USE PHOTOSHOP TO BREAK CONTIGUOUS SPACE...stick(s) must be in a physical environment. Take the stick apart, use a candy cab...anything you want so long as a stick is in the photo. Indoors, outdoors, etc.

PM me your photo by the end of February 15, 2012 and I'll collect them all, resize them if I can figure it out, and then show them in this thread, unmarked from who they came from. Not sure how we will pick the winner, maybe collectively, maybe MarkMan will want to pick the best one...I'll let you know around the 15th through the 20th when I post all the entrants.

One entry per username!

(My job takes me away from the internets for a week or two at a time but I'll be back by the 15th. If I'm not gone, I'll PM you back that I got your entry but, rest-assured, if I don't PM you back within that day I'm probably gone, and up some mountain with no communication and I'll PM you once I get back.)

Hopefully we get a number of entries, or I'll by sad ;-( You've got three weeks!

Good luck folks! And perhaps quote for the new page so we can get as many entries as possible, especially if I'm not here to do so myself.
Click to expand...

Doin this for YesBoss! since he might not be around to do it.
 
Stabby McSter said:
I'd definitely be interested, although it really depends on what it looks like. D:
Click to expand...

Seconded, but I'm also interested in how the mounting of the lever will work - do you have a mounting system that will allow at least both Sanwa and Seimitsu and won't require visible screw heads on the top plate? Also will have to presume your design doesn't have any sharp edges - one guy I know who milled his own aluminum stick could probably open a can of soup with it.
 
2de4661a.jpg


BAM. $20 brand new in box @ Gamestop. One left in a 20 mile radius. It's a temporary sale, so if you guys find it, I would snatch it up. Amazon's sale is for $45, and normally it's $70-80 online.

The buttons are much higher up and springier than sanwa, the gate is square, is the enclosure is small compared to the HRAP 3-SA design. Quite a bit heavier than I would've thought, which is nice. The ball top isn't unscrewable (at least without tools - the HRAP balltop came right off with a few twists) so no custom ball there.

For $20 this is an amazing steal. But for only one casual game (Tatsunoko) it's on par for my usage.
 
Oh yeah I didn't think about VC releases. What are the best 2d fighting ones?

Also the dead zone on the stick is HUGE. Requires real mashing
 
Georgious said:
The ball top isn't unscrewable (at least without tools - the HRAP balltop came right off with a few twists) so no custom ball there.
Click to expand...

The balltop is definitely removable, there'd be no way to install the lever if it wasn't. If you open up the bottom plate, the bottom of the shaft should have a slot for a flat-head screwdriver. Stick a screwdriver in, then twist the balltop off. If you were able to remove a balltop from any lever without doing this, someone screwed up when they installed it - they're not supposed to be removable without securing the shaft first.
 
StarCreator said:
The balltop is definitely removable, there'd be no way to install the lever if it wasn't. If you open up the bottom plate, the bottom of the shaft should have a slot for a flat-head screwdriver. Stick a screwdriver in, then twist the balltop off. If you were able to remove a balltop from any lever without doing this, someone screwed up when they installed it - they're not supposed to be removable without securing the shaft first.
Click to expand...

Oh really? When I got my HRAP I just literally twisted left a few times and the white top came right off, and now my bubble top sits perfectly on it. Might explain why sometimes it comes loose..
 
Grecco said:
Samurai Showdown II


Also love that stick cause of Tekkaman Blade My favorite character in TVC
Click to expand...

Tekkaman is no joke - his hyper combos are freakin' insane.

Wow I play so much better now with this stick - and am only now realizing that Zero plays nearly identically to the UMVC3 Zero. I never liked playing Zero in Tatsunoko, now I rip through with him. Interesting what a little perspective and practice can afford.
 
Georgious said:
Tekkaman is no joke - his hyper combos are freakin' insane.

Wow I play so much better now with this stick - and am only now realizing that Zero plays nearly identically to the UMVC3 Zero. I never liked playing Zero in Tatsunoko, now I rip through with him. Interesting what a little perspective and practice can afford.
Click to expand...


yeah Zero in TVC was pretty awesome too. I ran Zero/Tekkaman Blade when i played that game. I kinda loved Zeros Hyper combos in that game more than his MVC3 versions
 
Georgious said:
Oh really? When I got my HRAP I just literally twisted left a few times and the white top came right off, and now my bubble top sits perfectly on it. Might explain why sometimes it comes loose..
Click to expand...

Yeah, if it's not tightened properly that'll happen. Again, you'll have to break out the screwdriver to tighten it.
 
StarCreator said:
Yeah, if it's not tightened properly that'll happen. Again, you'll have to break out the screwdriver to tighten it.
Click to expand...

Thanks - I learned something new today
AchUiE




Is the online community for TvC non-existant? If any of you guys still play this game I'd love to see how the Nintendo Wi-Fi service handles it
 
Grecco said:
Samurai Showdown II
Click to expand...

I already have Samurai Shodown V for the xbox - too bad I don't have a dual-mod or anything. I can't bring myself to pay 9$ for Shodown 2 or 3 though..

Opened up the TvC stick - StarCreator was on the ball (no pun) with that screw securing in the balltop. Fitted a Seimitsu bubbletop to see if it fit, but went back to the white since the purple just looked out of place:
5b534a43.jpg

a6b10374.jpg

2dcf7533.jpg


See what I mean:
56c40947.jpg
 
The Wii classic controller to USB adapter will let you use the TvC stick on a PS3 but the buttons are mapped in a non standard layout. You will have to remap your buttons in game or rewire the buttons in your preferred layout.

I used it with a TvC stick I bought for $20 but now I am going to sell it since I picked up the brawl stick.
 
LegatoB said:
Ever heard of hyperbole? But seriously, in the US, you're lucky to find a couple of old Marvel 2 machines with half-functioning controls wedged between all the lightgun games and claw machines. And that's if you even still have a local arcade. If you want a place where the "arcade scene" hangs on by a lifeline, you gotta go to Japan or SE Asia.
Click to expand...

This is also not the case. It's regional to be sure, but there are still at least a handful of places in the US with thriving arcade scenes with current games.
 
Noob question here, why do PS3 and 360 fight sticks have different button positions? I think the 360 positioning seems better for me, but all my fighting games are on the PS3...
 
OneMoreQuestion said:
Noob question here, why do PS3 and 360 fight sticks have different button positions? I think the 360 positioning seems better for me, but all my fighting games are on the PS3...
Click to expand...

Hrm. I'm pretty sure that there shouldn't be a difference in layout on most PS3/360 sticks of the same model. Maybe there's a model you've gotten confused about?
 
Got a Hori T5 ps2 stick off ebay for $30 shipped.

Trying to decide whether I'll mod it with a korean stick, which I have never used, or hitbox style.

Has anyone ever used a Fanta? Any pros and cons I should be aware of?
 
atomic moth said:
Got a Hori T5 ps2 stick off ebay for $30 shipped.

Trying to decide whether I'll mod it with a korean stick, which I have never used, or hitbox style.

Has anyone ever used a Fanta? Any pros and cons I should be aware of?
Click to expand...

Wow I would love to see the T5 converted into a hitbox
 
Status
Not open for further replies.

Similar threads

TR Octopus Arcade stick review; its not cheap but damn is it the best
13
922
Spukc replied
If PlayStation is successful at selling their own Fight Stick what Arcade type games would you like to see make a comeback or be created?
2
52
397
phant0m replied
Arcade Archives 2
45
2K
Zuzu replied
2025 add Neogaf members on Steam the thread.
2
69
3K
OverHeat replied
  • Poll
NeoGAF Official Game of the Generation Thread [Midgen Edition] (WINNER: Elden Ring)
Community Poll  2 3
138
2K
Touch fuzZy. get BizZay replied
Top Bottom