If you've run out of drinking water during a lakeside camping trip, there's a simple solution:
Break off a branch from the nearest pine tree, peel away the bark, and slowly pour lake water through the stick. The improvised filter should trap any bacteria, producing fresh, uncontaminated water.
In fact, an MIT team has discovered that
this low-tech filtration system can produce up to four liters of drinking water a day—enough to quench the thirst of a typical person.
In a paper published this week in the journal PLoS ONE, the researchers demonstrate that
a small piece of sapwood can filter out more than 99 percent of the bacteria E. coli from water. They say the size of the pores in sapwood—which contains xylem tissue evolved to transport sap up the length of a tree—also allows water through while blocking most types of bacteria.
Co-author Rohit Karnik, an associate professor of mechanical engineering at MIT, says sapwood is a promising, low-cost, and efficient material for water filtration, particularly for rural communities where more advanced filtration systems are not readily accessible.
"Today's filtration membranes have nanoscale pores that are not something you can manufacture in a garage very easily," Karnik says. "The idea here is that we don't need to fabricate a membrane, because it's easily available. You can just take a piece of wood and make a filter out of it."
[...]
There are a number of water-purification technologies on the market today, although many come with drawbacks: Systems that rely on chlorine treatment work well at large scales, but are expensive. Boiling water to remove contaminants requires a great deal of fuel to heat the water. Membrane-based filters, while able to remove microbes, are expensive, require a pump, and can become easily clogged.
Sapwood may offer a low-cost, small-scale alternative. The wood is comprised of xylem, porous tissue that conducts sap from a tree's roots to its crown through a system of vessels and pores. Each vessel wall is pockmarked with tiny pores called pit membranes, through which sap can essentially hopscotch, flowing from one vessel to another as it feeds structures along a tree's length. The pores also limit cavitation, a process by which air bubbles can grow and spread in xylem, eventually killing a tree. The xylem's tiny pores can trap bubbles, preventing them from spreading in the wood.
"Plants have had to figure out how to filter out bubbles but allow easy flow of sap," Karnik observes. "It's the same problem with water filtration where we want to filter out microbes but maintain a high flow rate. So it's a nice coincidence that the problems are similar."
Read more at:
http://phys.org/news/2014-02-filter-sapwood-tree.html#jCp
