I've been coming to this thread for nearly a year asking questions and posting my opinions on certain things so I thought I'd share with you guys what I'm working with and what I've done in the past few weeks
I started my build in May
I ended putting the heatsink fan upside down, this particular one really frustrated me

Finally, after doing such a poor job building this thing it was beginning to look like something functional

I started it up a few times and eventually found out that I had some cooling issues (averaging 90C)
Being fed up with this thing I put it away and didn't touch until about August. I decided to apply new thermal paste and re-seat the heat sink fan. Remembering the frustration I had the first go round I decided to leave the motherboard in the chassis and re-install the heat sink fan with the chassis standing up (bad idea)

After doing that, it seemed to be a little better so I decided to over clock. I was at 60C on idle. This was when I decided to be ambitious. I made time to actually plan what I was going to do. I took it apart. Remembering where everything went and buying cable ties (yes, I know I should've organized this in the first place but with how the chassis is configured it was a little difficult and I was way too frustrated to bother)

I then looked up why it was running so hot. I followed the directions I saw on youtube about how to apply arctic silver 5 and from what I thought, I thought I did a great job.
It turns out I should've followed the directions on the Arctic Silver website (application of thermal paste differs depending on the cpu you have installed)
After re-applying appropriately and re organizing the wires I now have this
Now to get the temps to see if I did this right.
Long story short- Thank you guys.
I'm still in the process of trying to overclock to 4.0GHz (stable)
