Spike Spiegel
Member
This might seem like a stupid question, but I'm getting ready to assemble the components I purchased and... was my processor and/or motherboard supposed to come with thermal compound? Or was I supposed to buy that separately?
I believe the stock heatsink should come with some pre-applied.This might seem like a stupid question, but I'm getting ready to assemble the components I purchased and... was my processor and/or motherboard supposed to come with thermal compound? Or was I supposed to buy that separately?
This might seem like a stupid question, but I'm getting ready to assemble the components I purchased and... was my processor and/or motherboard supposed to come with thermal compound? Or was I supposed to buy that separately?
This might seem like a stupid question, but I'm getting ready to assemble the components I purchased and... was my processor and/or motherboard supposed to come with thermal compound? Or was I supposed to buy that separately?
I'd say on staying away from increasing voltage. You can increase the multiplier without increasing heat.
High for stock levels, good for an overclock.
Perfect! Though the case is certainly outdated, it shouldn't have problems. In addition, your mobo has enough space to where the GPUs won't be stacked right on top of each other. If you do notice an increase in temps, I'd suggest throwing a fan on the side panel. If you're still not happy with temps, you could replace the stock fans in the case with better ones. Those aren't requirements, but things to keep in mind if you aren't happy with temps.Links to case and mobo
What was your voltage at during stress testing? Only thing that I know of that does something similar is speedstep or MSI auto overclocking utilities. What mobo do you have again?I tried that out, took a look at the CPU-Z and the vcore stayed the same and only increased the multiplier from 3.3 to 4.0 and my temps got to really high levels (scary even, in the 80s C) while running Prime95. What setting could I be missing that was changing the voltage levels somewhere?
Looks good! You can try to decrease volts if you want, but that's a perfectly acceptable level as long as temps look good.Overclocking pictures and questions
High for stock levels, good for an overclock.I've got my 2500K and Coolermaster Hyper 212+ hooked up, and currently my CPU is running at 62-65 while running Prime95. Are these acceptable numbers? Could I kick it up a few more notches or?
quick question:
Is it a waste of processor to install the 32 bit of Windows 7 on a computer with an i5 2500k? I have a 32 bit install ready to go on a USB stick... getting the 64 bit version would be some work. (I hate work.)
I deleted all nvidia traces using driver sweeper and now I reinstalled. Will game later to see how it goes.
Before i was getting crashes/reboot jsut in desktop mode. So far so good. We'll see though.
I'd recommend a solid GPU if you go for the G620 - or the cheaper LLano AMD route as they're equipped with the GPU already. As far as motherboards go an H67 chipset should suit your needs if you go the intel route.Hey Guys, I am building a HTPC build and need a recommendation. I apologize for asking in this thread but couldn't find anything in my search for off topic threads.
Simple question, in your opinion, what's the best mini-ITX motherboard to handle on-board video processing (at 1080p) and DTS-HD or Dolby-HD decoding through HDMI?
I have all the other components lined up:
- NCIX Intel Pentium Dual Core G620 Processor LGA1155 2.6GHZ 3MB Retail Box $80 (this will be removed if I find an Atom or integrated CPU option that's better or if AMD is better)
- NCIX Kingston Value RAM DDR3 4GBX2 $45
- NCIX Kingston 64GB SSD V100 $80
- NCIX Silverstone SDP08 2.5IN to 3.5IN Converter Drive Bay Adapter $10
- NCIX Antec Microfusion Remote 350 Case $200
I'd recommend a solid GPU if you go for the G620 - or the cheaper LLano AMD route as they're equipped with the GPU already. As far as motherboards go an H67 chipset should suit your needs if you go the intel route.
Turbo is one core on single threaded applications, multiplier is all cores. Check out the OC guides in the OP, or in the "Race Your PC" thread (which you should add yourself too once you get all the new parts).Everything ordered and it will hopefully be here tomorrow.
That seasonic PSU looks amazing. Detachable wires? FUCK YES.
On the topic of CPU OC. Is there a different between turning off Turbo boost and OC to lets say 4 GHZ or setting up turbo boost to speed up to 4 GHZ?
I'd suggest a AMD E-350 motherboard/proc combo or a A8/A6/A4 with this motherboard. E-350 will handle win 7 + 1080p, but if you want a bit more gusto out of your proc and GPU, FM1 socket is a great way to go. I prefer both over any intel equivalents for HTPC builds. The computer I'm typing on right now (with keyboard in lap) is an E-350 rig hooked up to my 46" LED TV.Hey Guys, I am building a HTPC build and need a recommendation. I apologize for asking in this thread but couldn't find anything in my search for off topic threads.
Simple question, in your opinion, what's the best mini-ITX motherboard to handle on-board video processing (at 1080p) and DTS-HD or Dolby-HD decoding through HDMI?
I have all the other components lined up:
- NCIX Intel Pentium Dual Core G620 Processor LGA1155 2.6GHZ 3MB Retail Box $80 (this will be removed if I find an Atom or integrated CPU option that's better or if AMD is better)
- NCIX Kingston Value RAM DDR3 4GBX2 $45
- NCIX Kingston 64GB SSD V100 $80
- NCIX Silverstone SDP08 2.5IN to 3.5IN Converter Drive Bay Adapter $10
- NCIX Antec Microfusion Remote 350 Case $200
What was your voltage at during stress testing? Only thing that I know of that does something similar is speedstep or MSI auto overclocking utilities. What mobo do you have again?
memtest 86+ overnightEDIT
Also, everything is back at stock. Reset BIOS (flashed to newest version), and reinstalled Windows. Totally clean, problem persists.
memtest 86+ overnight
Also how are your temps?
Yep. My very first built of my own. Now with modular. I tried my best with hiding the wires.
Going to wait for Ivy bridge and the next Nvidia stuff as upgrades. Don't really need a high end GPU since I do not game on my PC. But it's nice to have in case someone else wants to or just for kicks. I already have over 4TB of space, 16GB of fast ram, Asus 7.1 sound card, and a faster than average SSD so I'm set there.
Just had a quick question. The Professional 64 bit version of Windows 7; how much space does it take up on an SSD once all updates such as service packs are downloaded?
Just re quoting.
OC noob here. Does this OC looks fine? I've followed the guide in the OP, leaved Vcore set to auto I believe, BLCK to 100 MHz, RAM set from 1300 Mhz to 1600 Mhz and disabled CPU PPL.
http://i.imgur.com/RKYQI.jpg
http://i.imgur.com/hUUMJ.jpg
http://i.imgur.com/AYdV2.png
I went from stock CPU speed of 3.3 GHz to 4.0 GHz, ran Prime95 for 1 hour, got no errors, raised 100 Mhz more, ran Prime95 again, and so until reaching to 4.5 GHz.
Gigabyte GA-Z68A-D3-B3
i5 2500k @ 4.5 GHz
212+
Corsair XMS3 4GB 1600 MHz
Is my Vcore right? Or should I lower it?
Thanks in advance
Is it normal for my OC'd CPU multiplier to drop down when not in use? I have my i5 clocked to 4.6 and when running Prime95 it shoots right up, but when idle it drops down to a 16x multiplier and runs at 1.6. Is this normal or is something off?
Assuming you overclocked the turbo multiplier (the preferred method) instead of the base cpu, yes. This allows you to save power when your CPU isn't doing much.
Sexy build, congrats!
Such a nice case, post pics when you're finished.Got this beast today.
Overclocking with the multiplier is good, but with the turbo multiplier isn't, since Turbo can only be enabled for "bursts".
That being said, even overclocking with the normal multiplier doesn't screw around with the power saving 1.6GHz SpeedStep. The only thing that will screw with that is if you're forcing the VCore to a certain value, then it won't drop as your CPU goes down to 1.6GHz.
The GPU is on the CPU die. That's what's so cool about the two AMD products I suggested.mkenyon, thanks for the suggestion about the E350 combo but I think I will do AMD A6.
I'm not familiar with AMD, but this will allow me to use the onboard graphics, correct?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131764
http://www.newegg.com/Product/Product.aspx?Item=N82E16819103951
SPINPOINT F3 IS $110 TODAY WITH PROMO CODE EMCJHJE29.Alright since HDD's prices are shit whats the current go to drive. The best one for price/space ratio. Or is it not possible?
Yes. You may or may not be interested in the unlocked A6-3670K that supposed to be released this month:mkenyon, thanks for the suggestion about the E350 combo but I think I will do AMD A6.
I'm not familiar with AMD, but this will allow me to use the onboard graphics, correct?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813131764
http://www.newegg.com/Product/Product.aspx?Item=N82E16819103951
This article introduces an update that optimizes the performance of AMD Bulldozer CPUs that are used by Windows 7-based or Windows Server 2008 R2-based computers. Currently, the performance of AMD Bulldozer CPUs is slower than expected. This behavior occurs because the threading logic in Windows 7 and in Windows Server 2008 R2 is not optimized to use the Simultaneous Multithreading (SMT) scheduling feature. This feature was introduced in the Bulldozer family of AMD CPUs.
Note This issue may occur when you use applications that run in multiple threads.
For a rough idea of what to expect, check out the last 3-4 ages or so of this thread: AMD | Bulldozer, Fusion, AM3+, FM1, and What's To ComeAfter you install this hotfix, Windows 7 and Windows Server 2008 R2 fully support AMD Bulldozer CPUs. Therefore, the CPUs operate at the expected performance level.
Dont overclock your memory tbh, its not usefull..
Your temp is around 60, quiet high for everyday usage. Also you need to at least run 8hour+ run of prime to see if really stable, prefferably 24h. (i one had an oc that died in 23h)
Yep. My very first built of my own. Now with modular. I tried my best with hiding the wires.
Going to wait for Ivy bridge and the next Nvidia stuff as upgrades. Don't really need a high end GPU since I do not game on my PC. But it's nice to have in case someone else wants to or just for kicks. I already have over 4TB of space, 16GB of fast ram, Asus 7.1 sound card, and a faster than average SSD so I'm set there.
The GPU is on the CPU die. That's what's so cool about the two AMD products I suggested.
Also, these procs are one place where fast memory is actually worth it, since your memory essentially acts as VRAM.
If you want to play games on it, and want to squeeze more out of the on-die GPU. Otherwise, 1333 or 1600 will do fine.So getting something like DDR3 1866, would be recommended?