Ban Puncher
Member
Should I buy Gourmet Sentai Barayaro?
I should buy Gourmet Sentai Barayaro.
I should buy Gourmet Sentai Barayaro.
Asked a similar question on the previous page but is a bundle like this worth the money?
Or is it more sound to get a console by itself?
It's not a bad price for the bundle, but yikes at that $50 shipping. I'd hold off on it just for that alone.
That shipping price is absolute bullshit. I don't even think that would cost $50 to ship by EMS.
It also might be a better idea to get a USA unit; it's much easier to modify that to play Japanese games than vice versa.
Yep. He actually had to have their manufacturer create a completely different size mold for their SNES/SFC cases just because the manuals wouldn't fit into their NES-sized cases. Unless there are games with very awkwardly sized manuals, there shouldn't be any issues.
I want to place the LttP manual and map inside something. Hopefully it fits in there as well.
Regarding Hagane, any tips on the running section in stage 1? Also, do these running sections repeat a lot? The entire game is grade A material, but those running sections are down right memorization, which is not cool.
EDIT: When did the japanese Hagane become so expensive? I remember that it used to be $70 boxed and everything.
Same reason Wild Guns started to go up. People found out that they dont really need the game to be in English to play it. Of course that hasnt really had an effect on Japanese Saturn games...so actually i'm not sure.
I remember when I got Wild Guns on Super Famicom for $8.90 from Play-Asia of all places back in 2007.
That was a good day.
Indeed, thank god i collected back from 2004-2006 time.
Was this pad ever regarded to be good....
Indeed, thank god i collected back from 2004-2006 time.
Was this pad ever regarded to be good....
Maybe I can beat Contra 3 on hard with that.If you're looking for a good SNES controller with turbo functionality, get the ASCII Pad.
I have the 3DO version of this. It's serviceable, but a standard SNES pad is better.
If you're looking for a good SNES controller with turbo functionality, get the ASCII Pad.
That's really, really good actually.Found Demon's Crest at a local video game store for 80 bucks. Not too bad, especially seeing what they go for on eBay.
Found Demon's Crest at a local video game store for 80 bucks. Not too bad, especially seeing what they go for on eBay.
Found Demon's Crest at a local video game store for 80 bucks. Not too bad, especially seeing what they go for on eBay.
Cart only is going for even more than that? Wow.
Wow thats great. I am jealous. I just got Gargoyles Quest 2 for £26 (togheter with Darkwing Duck, Turtles, Mcdonaldland and Little Nemo which I all own) which I was pretty happy with
Nice. I think I've said it before, but I feel Gargoyles Quest II is a better game than Demon's Crest.
I think I only paid, like, 35 for mine and I still thought that was too much. Criminey...Found Demon's Crest at a local video game store for 80 bucks. Not too bad, especially seeing what they go for on eBay.
Ah don't worry, it typically costs 100-300 bucks now, over double that brand new.I think I only paid, like, 35 for mine and I still thought that was too much. Criminey...
What about cart only? I picked up a cart a few years back for $20 and absolutely loved the game. Was surprised to see it spike in value so high.Ah don't worry, it typically costs 100-300 bucks now, over double that brand new.
What about cart only? I picked up a cart a few years back for $20 and absolutely loved the game. Was surprised to see it spike in value so high.
Yep, the prices I listed were cart only for most as it's far more in CIB. There are people who sell it for 200 bucks just for only the cart.What about cart only? I picked up a cart a few years back for $20 and absolutely loved the game. Was surprised to see it spike in value so high.
Yeah the shipping price was what definitely put me off from making a trigger purchase.
I was also looking into getting a US unit as well since I saw a reference to the modification earlier in the thread (though I've never seen/read how it's done).
I never did that to my SNES, somehow the thought disturbs me(I guess it's because this is the SNES I've had for nearly 23 years, it's my baby). Luckily I found a Super Famicom for around 30 bucks in a store a couple years back.
To play Japanese games on a North American SNES, you just need to clip off two tabs in the cartridge bay.
Basically, there are two little tab things in the cartridge slot.
This is not my image. It is stolen.
But basically, you cut those off, and that's it. Super easy.
If your SNES is the original model, it will look more like this inside:
Wow. Had no idea it was that simple.
Some games won't work though
Some games won't work though
Some PAL games I guess? All NTSC stuff should be fine AFAIK. I could be wrong, of course.
Some PAL games I guess? All NTSC stuff should be fine AFAIK. I could be wrong, of course.
i can 100% confirm PAL Pocky & Rocky don't work, or at least mine didn't. had someone repro the US version onto it for me, but now there's no dialog in the cutscenes =/
Officially licensed 50Hz bootlegs, basically.PAL is a helluva drug
I don't think this has been posted. A handy site for quick reference and for collecting newbies.
http://www.racketboy.com/retro/nintendo/snes
- The site appears to be down. If you search on Google, you should be able to find some, I haven't received the order I put in yet, but I paid $0.79 ea for a case of 100, including shipping. eBay has them for a lot more, so beware.Personally, I use the universal game cases from mediashelving.
http://www.mediashelving.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=W&Product_Code=USCG
Seconded. These work great. Pair them with covers from thecoverproject, and you've got a pretty nice way of storing things.
Keep in mind that 1 just equals a box of like 100 or something, not just 1 case.
I will buy mine from this guy.
He also has a homepage here: http://www.videogameboxprotectors.com/
It's possible that it might be a bit cheaper to order directly from the site, especially if you're buying in bulk.
I think this is one of the best videos on cleaning retro stuff.
<3 Clan Of The Gray Wolf
http://www.youtube.com/watch?v=5LlxGGywkbU
Markers on your games?
Dry erase marker will take it out
I'm not sure about solvents or dry erase markers, but something that definately works are Mr. Clean magic erasers. To demonstrate this I recently defaced an N64 cart with a sharpie and gave it some time to dry.
Here's what it looked like before:
https://sphotos-a.xx.fbcdn.net/hphotos-ash3/538323_530435833663969_815350923_n.jpg
And after:
https://sphotos-b.xx.fbcdn.net/hphotos-prn1/59754_530435923663960_1474786912_n.jpg
I know the sharpie wasn't on for long, but this is the same method that I use to clean up all my carts, some of which have sharpie that could easily be 10-15+ years old, and they look literally brand new after the magic eraser and some good old elbow grease.
The magic erasers work great, but keep in mind, that they're essentially extremely fine abrasive pads. It'll remove some of the texture of the carts.
Not a big deal for some, but something to keep in mind.
Also, in some cases, that "Magic Eraser" (Mr Clean, I think) really removes deep stains, scratches, and other blemishes. It's less useful with textured plastic but can definitely save the day in some cases.
Also, for console cleaning, Armorall works wonders. I used it on a Genesis and it looked brand new in the end.
If your to worried to use Magic Erasers in fear of scratching away the plastic, use this stuff on markers. I promise it works within 30 sec. It even removed marker names off the back N64 cart label. I found this trick on a youtube video.
I use 50/50 rubbing alcohol/water and qtips. I usually just do the contacts, but I go up and down, not side to side like that video shows. Seems to work better. If the cart itself is dirty, I will clean it also. But, I'm still super careful and use qtips to do spot cleaning, not just hose and scrub the whole cart.
I just gave my snes a thorough cleaning. Works great now.
I wrapped a credit card with an old thin tshirt and dipped it in alcohol. I stuck it in between the pins a few times, and dried it off the same way
PSA: FOR THOSE THAT NEED TO CLEAN GAMES
Alcohol is OK, but this stuff actually cleans the contacts: http://www.nintendorepairshop.com/products/81--1-Nintendo-Game-Cleaning-Kit/
Literally makes your contacts look new and work every single time.
Here is a video of the kit: http://youtu.be/LKxbE_EKmdM
I have used their kits for over 300 games.
You could always look into buying an extension. I haven't used one myself but it should do the job.
http://compare.ebay.com/like/160648295880?var=lv<yp=AllFixedPriceItemTypes&var=sbar
http://videogames.pricecharting.com can be a good guide. It gives an updated list of how each game are selling in general.
No modification to the cart shell at all. The key is finding a battery holder that has a low profile, as you're limited in the space you have.
Here's a pic of one of the first carts I modded:
In this picture, I didn't put the new battery in yet, but that's the most trivial task (haha). The old battery is sitting on the right side. In the case of this game, the battery was starting to leak.
Also, I must mention, and probably is what would interest people the most, is I have the ability to maintain your save files, (presuming the battery isn't completely dead). I have a retrode, and I can backup the save file (and even email it to you to use in emulators and what not) and restore the save after installing the new battery.
I use this battery holder:
http://www.mouser.com/Search/ProductDetail.aspx?R=S8421-45Rvirtualkey57420000virtualkey855-S8421-45R
It does require some slight modification to use it though. It's a surface mount part, but the battery on the cart is a through hole component. You simply bend down the legs on the battery holder, and they're the perfect width, and you solder them in.
There was a guide somewhere (instructables, I think) that shows this better, but I don't have the link for it right now.
Those of you who are looking for Konami and Capcom games should be aware of the Majesco re-releases. They come with black/white manuals and the cart labels are of lower quality. They are indentified by the "Assembled in Mexico" text on the back of box and cart.
Those of you looking into buying a US SNES console should go for the 1CHIP revision of the SNES. They can often be indentified by the serial number on the underside of the console. Serial UN309431*** - UN318299*** should be a 1CHIP, but there is no way to be certain other than to open up the console and check the board. Comparison shots:
*go to original post for pictures*
Also, if anyone is confused about getting a 1Chip SNES, or wants to know which SNES they have, heres a good guide to help you figure all that out. Mines a UN299943***, which i still dont really know what it is. But its probably not the good one.
https://docs.google.com/spreadsheet/pub?key=0AvE57-VbN9_HdEpkUUR0U1hzMHFWVWw3VXhORHFIanc&output=html
This is probably universally common knowledge, but in case you don't know already:
To play Japanese Super Famicom games on an American SNES, all you have to do is break off two small pieces of plastic in the system's cartidge slot. Once the cartridge makes full contact with the pins, it has no region protection.
This is a detailed explanation, but I just grabbed a pair of needle-nose plyers and bent the tabs back and forth until it snapped.
I can't speak from experience about the adapters, but since I just bought Earthbound and only have an SFC in this apartment, I'll definitely be buying one over the next couple of weeks. I'll post my impressions in this thread.
The SFC and PAL SNES both have the yellowing issue since they're made from the same type of plastic (and possibly even the same mould), but it's definitely less pronounce in Japan.
If you're still deciding between a PAL SNES or SFC, here is some direction/advice:
• SFC definitely works with US games, either by widening the cart slot or using an adapter;
• SFC is compatible with US plugs, PAL SNES requires transformer;
• SFC has same native resolution/framerate as US SNES, PAL SNES has different resolution;
• SFC is cheaper, due to collecting not really taking off in Japan;
• Importing a PAL SNES may be cheaper due to distance;
• PAL SNES controller cables are same length as US SNES cables, SFC cables are much shorter;
• Option of playing JPN-exclusive games "natively" on a SFC.
If you're in N.A. and choosing between a PAL SNES or SFC, there really is no question. Go for an SFC!
Just have to really examine the sticker. A lot of the times they'll be a lot brighter/sharper than the real thing, as shown here:
The only way to be 100% sure is to get a tool to open the cart. If there are any wires on the inside, it's a fake.
Here's the inside of my Secret of Mana 2 repro so you can see what I mean:
They may not be exactly like that, but there will be zero wires in any legit cart.
With all the talk of fakes, might be a good time to think about what you guys do when you pick up new addition to your collection.
Abridged version - Every time I get a new SNES game, before it touches my system:
1) Examine exterior of cart for any signs of abuse or counterfeit
2) Open cart and examine PCB, battery connection, etc.
3) Clean PCB contacts with alcohol, and compressed air dust the rest
4) Clean inside and outside of cart while the PCB is removed
5) Reassemble
6) Test
7) Place connector cover on cart and properly care for and store any box/manuals/paper
Actually very simple and quick to do, and will help both games and consoles last longer. I haven't caught any fakes just yet, but I've restored many "poor" condition games into "almost like new" with just a little effort.
EDIT: Found it. This is the one I have, bought from this exact seller. Even those prices have gone up apparently. I paid $4.57 shipped for it back in May. Nothing related to SNES is safe from skyrocketing prices.
They sure do! Fancy ones too!
This PVM uses RGB, but if it's anything like the one I have, you can convert the inputs to component via the onscreen menu. If you're interested you can read up on it, and I posted a bit more here.
If you're specifically looking for a 40''+ CRT that uses component, there are screens like this
Stolen from Nintendo Age forums, their list of retro stores:
Here's the thread for those looking for other states.
Cyborg Justice is the fucking shit. Anyone who hasn't played it, get it now. You are a robot, who can rip the arms/weapons off other robots and attach them to yourself. It's awesome.