Garrett Hawke
Member
I don't think it will ever happen, the switch and joy cons are coated with something to make the plastic feel soft. that coating interacts with pretty much any adhesive according to the dbrand guy.
-
Hey, guest user. Hope you're enjoying NeoGAF! Have you considered registering for an account? Come join us and add your take to the daily discourse.
The Switch Protection Thread
- Thread starter Aztechnology
- Start date
AlexFlame116
Member
Dang. Oh well, I'll just have to be gentle with the Switch!
Thanks for also answering the last time a while ago by the way! I accidentally closed my response from before so it never sent but I had never noticed until recently!
Garrett Hawke
Member
no problem
here is where dbrand confirm that it's any skin, btw.
https://www.reddit.com/r/NintendoSwitch/comments/5xc5si/warning_do_not_skin_your_nintendo_switch/
no problem
here is where dbrand confirm that it's any skin, btw.
https://www.reddit.com/r/NintendoSwitch/comments/5xc5si/warning_do_not_skin_your_nintendo_switch/
Oh, fantastic. Seriously? After I bought an officially licensed product and applied it?
Guess it's never coming off, then. Glad I invested the time and concentration required to align each section of the skin perfectly.
Garrett Hawke
Member
apparently the pdp ones are unaffected, for some reason. dbrand states that any vinyl adhesives will damage it - perhaps the pdp ones aren't vinyl?
Yes, unfortunately I'm sure. They're micro abrasions so they're very light and on the very top of the surface. They're only pin head sized and only visible in very certain lighting conditions when the screen is off - most people probably wouldn't notice them unless you tell them where they are and show them. But its one of those...once you know they're there, you notice them.
My concern isn't really over the micro abrasions; they're very hard to spot and don't affect the image quality at all when the screen is on. It's just the fact that it really doesn't take much to scratch the screen at all. More careless users that don't have a screen protector are likely going to have fairly scratched up screens after just moderate use in a year or two.
AndrewDean84xX
Banned
I had zero issues installing the Premium Hori Screen Protector to my daughters switch. I usually suck at applying screen protectors too. Zero complaints. It's crystal clear. My daughter doesn't even notice I put one on her Switch.
I'll likely get one for the Switch I'll get myself in the Summer.
I'll likely get one for the Switch I'll get myself in the Summer.
AlexFlame116
Member
billmcdougal
Member
I did my amFilm last night.
Hinge lead to perfect alignment... but then removing the stickers was harder than i thought. The strong adhesive led to lifting up the protector on accident. Or maybe it was just the top film.
Did it in a steamy room and still ended up with one piece of dust or little hair or something. I thought about lifting it with tape to get it out, but it seemed hard to lift and i think i heard that can let even more under and/or compromise the application.
I might be able to deal if i can't see it while playing.
| Praxis |
Banned
Did anyone's Orzly tempered glass protectors turn up today? Mine is apparently due tomorrow, but I'm not very confident that it will.
| Praxis |
Banned
Someone had one in one of these threads. They ordered it on eBay. They didn't post pictures or anything and they haven't been back to complain about it peeling away in the dock so i guess that's good. I think there is no cut out for the auto brightness sensor though, but i can't really see what difference that would make.
these are cute haha, only way to get some type of skin I guess with the dbrand issue
Oh. That's good news indeed. Still waiting for mine.
bobawesome
Member
Are there any good solutions for protecting the back of the Switch? The only thing I really see is that hybrid cover.
https://www.amazon.com/dp/B01N22YBVY/?tag=neogaf0e-20
https://www.amazon.com/dp/B01N22YBVY/?tag=neogaf0e-20
So I just got back after several hours with my second amFilm replacement screen. For those who may not be aware, I initially had massive bubbles with both screens. To note, I have installed more than a dozen screen protectors. This replacement came in rapidly, and I have a 100% success with my new screen. Did the same method that I did initially (hinge stick method) and it worked perfectly. The YouTube video offered by amFilm is basically useless to have a foolproof installation. I don't know why this installation worked perfectly compared to the first time, but I don't want to hear this crap about "skill." I hope everyone installs their screen successfully!
Got my PDP case today (Mario version). Well, for a cheap case it is okay... I don't think the build quality is bad, at least on mine. Everything is in tip top shape, no hanging threads, no rips on the exterior, etc.
however there is one thing about it I automatically don't like... when the Switch is inside and the case is fully zipped up and closed, it takes a very low amount of pressure applied and you will hear the thumbsticks 'click', so little pressure that it's barely more pressure than if it were not inside a case at all.
I really want a case that offers a little more protection for the sticks. So, I will be looking into something else... but this will be okay for two or three weeks I guess.
I do like the pattern design on the outside, inside, and the Mario Coin as the zipper though.
I'd recommend this case if you want something cheap, offers some low level protection and you don't think you will ever have your case in a situation where it might get slightly 'squished' (like in a backpack)
As for my amfilm glass screen protector, i went to install it immediately after taking a shower to help minimize dust. I use this same brand on my iPhone 7 Plus and it worked perfectly on the first try... however this time I could not seem to get all the air bubbles out no matter how hard i tried, and just when I thought I got 98% of the bubbles out... I there was a dust particle right in the middle of the screen! I was pressed for time so just said screw it... I'll have a 2nd go with the spare inside the package sometime this week when I'm not rushed... my mistake. But that was actually the first time I ever failed to apply one properly, was a bit frustrating.
however there is one thing about it I automatically don't like... when the Switch is inside and the case is fully zipped up and closed, it takes a very low amount of pressure applied and you will hear the thumbsticks 'click', so little pressure that it's barely more pressure than if it were not inside a case at all.
I really want a case that offers a little more protection for the sticks. So, I will be looking into something else... but this will be okay for two or three weeks I guess.
I do like the pattern design on the outside, inside, and the Mario Coin as the zipper though.
I'd recommend this case if you want something cheap, offers some low level protection and you don't think you will ever have your case in a situation where it might get slightly 'squished' (like in a backpack)
As for my amfilm glass screen protector, i went to install it immediately after taking a shower to help minimize dust. I use this same brand on my iPhone 7 Plus and it worked perfectly on the first try... however this time I could not seem to get all the air bubbles out no matter how hard i tried, and just when I thought I got 98% of the bubbles out... I there was a dust particle right in the middle of the screen! I was pressed for time so just said screw it... I'll have a 2nd go with the spare inside the package sometime this week when I'm not rushed... my mistake. But that was actually the first time I ever failed to apply one properly, was a bit frustrating.
Hold down the power button for about 12 seconds.
RandomExpletive
Member
+1 for the AmFilm, took a bit to remove a bubble but using the hinge method it was a breeze to install and fits perfectly.
| Praxis |
Banned
So Orzly uploaded a video of their tempered glass protectors to YouTube, they run it through a few tests and demonstrate the hinge method of installing it.
https://youtu.be/1U3byIjQ5tQ
In the video they recommend letting it set for around 8 hours. It also has the cutout for the light sensor, contrary to what a poster on here said.
https://youtu.be/1U3byIjQ5tQ
In the video they recommend letting it set for around 8 hours. It also has the cutout for the light sensor, contrary to what a poster on here said.
StAidan
Member
Installed my amfilm protector tonight (hinge method). The first attempt failed, with unsightly bubbles that I just couldn't get rid of. So I opened up the second protector and applied that one. Still a small bubble on the edge of the left bezel, which is gonna bug the heck out of me, but the screen is fine, so I guess I'll just live with it.
Aztechnology
Member
Short of a visit to one retailer that might have other tempered glass protectors, it looks like this is the one i'm going with, given that it's the only one that will arrive in a decent amount of time.
EDIT: Well, Caseology decided to relist & needs the order cancelled.
EDIT: Well, Caseology decided to relist & needs the order cancelled.
VARIA
Member
This looks good (would be even better if it was matte black!) and it's nice that it uses the rest of the original dock as well. As much as I would like a 3rd party solution to the problem, I would rather use first party tech as much as possible.
Agreed. I don't put screen protectors on any of my devices but this couldn't have been simpler and it looks amazing. Can't even tell it's on there. In fact, I think this shows finger prints even less than the regular screen so it's even better. So happy with the purchase and happy to finally use the switch out of the dock.
piratepwnsninja
Member
Is there a video of how to take the dock apart?
Ah, that's a relief! Thanks for the info.
Joei
Member
I'm gonna order this today but I'm really nervous since I am generally awful at putting on screen protectors. But I just bought a Switch a few days ago and don't want to mess it up.
I applied the amFilm screen protector today and I could not be happier with the results. No screen bubbles or visible dust under the screen! Here are the steps I followed if anyone is interested:
1. Run a hot shower for approximately 10 minutes
2. Clean the bathroom counter thoroughly
3. Line up the screen protector where you want it on your Switch
4. Use hinge stickers to attach the screen protector to your switch so that you can flip it back and forth, like the cover of a book
5. Thoroughly clean the actual screen of the switch, first with the alcohol wipe, then with the dry wipe
6. Remove the sticky side plastic off the glass of the screen protector and use the plastic tabs on the side to help guide it down
7. Use the included card and cleaning cloth to remove any additional air bubbles.
8. Play Zelda without any worry of scratching the screen!
1. Run a hot shower for approximately 10 minutes
2. Clean the bathroom counter thoroughly
3. Line up the screen protector where you want it on your Switch
4. Use hinge stickers to attach the screen protector to your switch so that you can flip it back and forth, like the cover of a book
5. Thoroughly clean the actual screen of the switch, first with the alcohol wipe, then with the dry wipe
6. Remove the sticky side plastic off the glass of the screen protector and use the plastic tabs on the side to help guide it down
7. Use the included card and cleaning cloth to remove any additional air bubbles.
8. Play Zelda without any worry of scratching the screen!
I recommend the amFilm glass screen protector as well, I spent this morning applying it after removing the old one that bubbled. And had zero issues, and no bubbles. Time wise it took less than 10 minutes, and that includes reading the instructions
Also they come in 2 packs as well. So if you do mess up one you have a spare (at least the one I ordered from Amazon did).
https://www.amazon.com/gp/product/B01N3ASPNV/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Also they come in 2 packs as well. So if you do mess up one you have a spare (at least the one I ordered from Amazon did).
https://www.amazon.com/gp/product/B01N3ASPNV/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
The Omega Man
Member
I recommend the amFilm glass screen protector as well, I spent this morning applying it after removing the old one that bubbled. And had zero issues, and no bubbles. Time wise it took less than 10 minutes, and that includes reading the instructions
Also they come in 2 packs as well. So if you do mess up one you have a spare (at least the one I ordered from Amazon did).
https://www.amazon.com/gp/product/B01N3ASPNV/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Thanks, that one ships to Canada so I bought it, I've been waiting for the Orzly one with a freaking nebulous date.
whichever I get first goes on my Switch screen.
After them ignoring many emails, contacted GAME again, spoke to someone, and they're refusing to give me a refund for the obviously defective Premium Hori Screen Protector. Honestly I'm not surprised by this. GAME are an awful company who don't give a damn about peoples rights. It's a good job it's only £15.
Mean while, I still haven't received the Orzly Tempered Glass Screen Protector from G-hub I think it is on Amazon UK. It was meant to arrive yesterday after being dispatched last Monday. They said they shipped it via Royal Mail, not sure I believe that...
I'm just not having any luck at all with these things lol.
Mean while, I still haven't received the Orzly Tempered Glass Screen Protector from G-hub I think it is on Amazon UK. It was meant to arrive yesterday after being dispatched last Monday. They said they shipped it via Royal Mail, not sure I believe that...
I'm just not having any luck at all with these things lol.
Another +1 for amfilm on my side. 100% recommend it. I'm a screen protector veteran and found it pretty easy to do. Wet wiped the screen, dried it, made sure all the dust was off, then lined up and applied. No issues.
I did put it in the dock right after, I should check that today if there's any issue.
Also, fyi I ordered on on March 6th and received it on the 13th. A week turnaround, even if it said out of stock.
I did put it in the dock right after, I should check that today if there's any issue.
Also, fyi I ordered on on March 6th and received it on the 13th. A week turnaround, even if it said out of stock.
RandomExpletive
Member
Assuming thats a bubble just keep working it with a cloth towards the edge. Took me 5-10 minutes to get rid of
I have a buddy that owns one but I don't know shit about them.
Is there some standard file format?
Edit: Damn, he got rid of it!
I'm in the same boat, mate. If it hasn't turned up by tomorrow I'll be making some enquiries.
Tabasco
Member
Got my amFilm protectors today and just applied one of them.
The bad news is that I screwed up the other one by allowing too much dust to catch onto the adhesive. I would definitely recommend applying this in a clean bathroom at the very least.
Even attempting with the second protector had me paranoid because as I was trying to align it properly, the second piece of plastic came off and that laid the protector down in place when I wasn't ready. This alignment doesn't seem to look perfect, but I'm just going to believe that the cutout for the protector doesn't fill the entire screen.
Now I'm short one screen protector unless I can use the dust removal stickers to get rid of the dust if I'm ever going to use it.
Are these good for the life of the console, and are people allowing a day for it to settle in before using the dock?
The bad news is that I screwed up the other one by allowing too much dust to catch onto the adhesive. I would definitely recommend applying this in a clean bathroom at the very least.
Even attempting with the second protector had me paranoid because as I was trying to align it properly, the second piece of plastic came off and that laid the protector down in place when I wasn't ready. This alignment doesn't seem to look perfect, but I'm just going to believe that the cutout for the protector doesn't fill the entire screen.
Now I'm short one screen protector unless I can use the dust removal stickers to get rid of the dust if I'm ever going to use it.
Are these good for the life of the console, and are people allowing a day for it to settle in before using the dock?
Marty Chinn
Member
You wait a bit before going in and doing it. The steam is supposed to attach to the floating particles in the air and bring them down so there aren't any dust particles in the air when you apply it.
MikeyKlump
Member
I recommend the amFilm glass screen protector as well, I spent this morning applying it after removing the old one that bubbled. And had zero issues, and no bubbles. Time wise it took less than 10 minutes, and that includes reading the instructions
Also they come in 2 packs as well. So if you do mess up one you have a spare (at least the one I ordered from Amazon did).
https://www.amazon.com/gp/product/B01N3ASPNV/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Yup have the amfilm one on as well. It feels great, makes touching the screen feel much much better. Can't wait for some touch based games now.
MikeyKlump
Member
Rare case in which the screen protector actually makes the device much better.