BigBlackGamer
Member
Tallshortman said:Is she playing the Witcher 2 with a pad? Blasphemous![]()
witcher 2 is awesome with a gamepad.
Tallshortman said:Is she playing the Witcher 2 with a pad? Blasphemous![]()
You can get the previous gen SSD. Most of their issues have been corrected. A Raid HDD may offer similar max read / write, but they can't come close to matching a SSD seek time.Tmac said:On the past weeks i have been reading a lot of complaits about SSDs and dont feel confident about it.... should i go with a HD RAID? Is that worth it?
LaneDS said:Unplugged the cables that run from the PSU to the mobo and plugged them back in and tried booting with just a keyboard and monitor connected. Verified that the RAM was properly seated along with the GPU. Same problem.
Here is a video of what looks to be the same problem on perhaps the same board... can't see because the quality of the video is so low: http://www.youtube.com/watch?v=D5ThiMshY30
Someone there mentioned having issues with the RAM, so I tried various configurations of my two sticks including one stick of memory and no sticks of memory. Same problem.
The system is now consistently starting up for half a second when I hit the power then shutting off (LEDs go off, fans stop). About two seconds later, without touching the power button again, the system kicks back on and everything runs for about 30-40 seconds before powering off again. This happens regardless of whether I have RAM present or if the GPU or SSD is plugged in.
I know the GPU works fine since it was in my old desktop running happily for the last week. That was on a less powerful PSU as well.
Going to order another PSU since Amazon will have one here by the time I'm out of work tomorrow in the hopes that is the problem. If not, I'll assume it's the motherboard which will be kind of a kick in the teeth as that took a long while to install in the case.
AwesomeSauce said:Try turning on the system on with the 8 pin cpu power unplugged.
Let me know what happens.
LaneDS said:Alright, unplugged the CPU power and tried booting it. First four times it shut itself off after about a second, but on the fifth attempt it stayed up. About five minutes later, the machine is still running. No monitor is hooked up, no RAM is installed, GPU is powered.
Very odd.
AwesomeSauce said:Most likely scenario is that your motherboard is bad and needs to be replaced.
LaneDS said:Bummer, but thanks all the same.
I play with 360 controller. Love the mouse but just can't get my grips around the keyboard.KoruptData said:Yeah, she loves her rpgs and wanted to play The Witcher 2. She plays the 360 all the time so I just got a wired 360 controller.
AwesomeSauce said:Don't let that keep you down. It happens to a lot of us.
I had 2 builds that i worked on had DOA motherboards that gave me headaches. Once you get your replacement, all should be golden.
Corsait 750W V2 is only $10 more after rebate.drakesfortune said:I'm really struggling with the case to be honest. Anyone have any from the OP that they really like? I'd like to be in the $100 range on that.
How about this PSU, would this be better than the Roswell?
http://www.newegg.com/Product/Product.aspx?Item=N82E16817139028
Pll overvoltage offLaneDS said:Oddly enough, I'm poking around the BIOS currently after installing one stick of memory. Will test/troubleshoot a bit more after work (I've stayed up far too late, but it's hard to just ignore the machine after working for so long on it) and hope to find more. Almost certainly will try a different motherboard after such a rough start though.
Anyway, thanks again to you and others who have assisted. Love this thread.
Edit: Annnd... victory?
Yeah, just don't load test GPUs and CPU together (furmark + prime 95)Azadi said:Quick question guys, would the Corsair HX750w power supply be enough to run GTX 570's in SLI?
Thanks
Hazaro said:Pll overvoltage off
disable marvell sata controller if theres nothing in those ports
Mr.NiceGuy said:Doing my inquiry before I buy my new GPU, I asked several questions and the Gaffers here were of much help and I'm thankful for them specially LordCanti. Now I'm down for my last step.
My specs:
CPU: Intel Core 2 Duo E4500 2.2 GHz
GPU: Geforce 9500GT
Motherboard: msi G41M4-F (link: http://www.msi.com/product/mb/G41M4-F.html )
RAM: 3 GB DDR2
Extra note: (My brother might give me his Core 2 Quad Q9400 2.66 GHz).
For a GPU I'm down for 3 choices :
1-EVGA GeForce GT 440 (price 80 or 70 after rebate)
2-EVGA GeForce GTS 450 (price 120 or 95 after rebate)
3-EVGA GeForce GTX 460 (160 or 140 after rebate)
I'm really leaning towards the GTS 450 as the price just fit my budget. Not really buying the card for games as I rarely play on my PC but there are some games I'd like to play in the future like "From Dust" in full settings and "Skyrim" in medium settings, if the GT 440 can do the job that would be even better, the GTX 460 is a little above my budget and I'm not sure I should put that much of money on it since I'm deciding to do a total overhaul to my PC 12-18 months later so then I can return to other games I missed like The Witcher 2.
So what do you guys recommend ? please put in mind that I might or might not change my CPU to Core 2 Quad Q9400 2.66 GHz like I said before.
Momo said:I need to build an inexpensive PC capable of running a Gnome 3 based Linux distro, will be used for watching HD videos and light photoshopping/email/internet.
Could you recommend me some hardware?
Motherboard
Amount and Type of RAM
Video Card
Processor
Power Supply
Reliable HDD makers
I would appreciate it.
Thank you! I have a case I bought last year, but I'm going to keep it sealed. I'm going to do an Atari mod on it (all white with red logo).TheExodu5 said:I'm not completely up to date with lower speced PC's today, but I'd be leaning towards an AMD Fusion CPU, most likely the AMD A8 3850. Get the cheapest FM1 motherboard you can from Asus, AsRock, or Gigabyte. 4GB of the cheapest DDR3 you can fine. Corsair CX430 PSU. As for the HDD, the Samsung F3 1TB is tough to beat.
Hopefully someone can either reinforce my suggestions, or suggest a better alternative, if there is one.
Do you already have a case?
GTS 250 performs similarly to a GTS 450, and even beats it in some games. Can save some money if you pick one of those up instead if that's what you are concerned with. You won't have DX11, but a 450 isn't really going to take advantage of that anyway. Then again, the 450 does OC pretty well apparently, which could make a difference if you want to go that route.Mr.NiceGuy said:Doing my inquiry before I buy my new GPU, I asked several questions and the Gaffers here were of much help and I'm thankful for them specially LordCanti. Now I'm down for my last step.
My specs:
CPU: Intel Core 2 Duo E4500 2.2 GHz
GPU: Geforce 9500GT
Motherboard: msi G41M4-F (link: http://www.msi.com/product/mb/G41M4-F.html )
RAM: 3 GB DDR2
Extra note: (My brother might give me his Core 2 Quad Q9400 2.66 GHz).
For a GPU I'm down for 3 choices :
1-EVGA GeForce GT 440 (price 80 or 70 after rebate)
2-EVGA GeForce GTS 450 (price 120 or 95 after rebate)
3-EVGA GeForce GTX 460 (160 or 140 after rebate)
I'm really leaning towards the GTS 450 as the price just fit my budget. Not really buying the card for games as I rarely play on my PC but there are some games I'd like to play in the future like "From Dust" in full settings and "Skyrim" in medium settings, if the GT 440 can do the job that would be even better, the GTX 460 is a little above my budget and I'm not sure I should put that much of money on it since I'm deciding to do a total overhaul to my PC 12-18 months later so then I can return to other games I missed like The Witcher 2.
So what do you guys recommend ? please put in mind that I might or might not change my CPU to Core 2 Quad Q9400 2.66 GHz like I said before.
Alright, now assuming if my recommendation is good, there's one question that needs answering: is the A8 and it's internal GPU supported by your Linux distro? I'm not sure what the driver situation is with Linux today.Momo said:Thank you! I have a case I bought last year, but I'm going to keep it sealed. I'm going to do an Atari mod on it (all white with red logo).
Im setting up a basic PC for a friends parents, so they can communicate with my friend.
TheExodu5 said:I'm not completely up to date with lower speced PC's today, but I'd be leaning towards an AMD Fusion CPU, most likely the AMD A8 3850. Get the cheapest FM1 motherboard you can from Asus, AsRock, or Gigabyte. 4GB of the cheapest DDR3 you can fine. Corsair CX430 PSU. As for the HDD, the Samsung F3 1TB is tough to beat.
Hopefully someone can either reinforce my suggestions, or suggest a better alternative, if there is one.
Do you already have a case?
I'll pretty much choose a distro on supported hardware + G3. Most likely Ubuntu when it ships with faultless G3. I'm pretty sure the situation is much less bleak in tuxworld these days drivers wise.TheExodu5 said:Alright, now assuming if my recommendation is good, there's one question that needs answering: is the A8 and it's internal GPU supported by your Linux distro? I'm not sure what the driver situation is with Linux today.
Adding a phenom based built to my to be researched list xDMisterNoisy said:I like that, though I'd also look into a decent Phenom IIX4 (955-ish) combined with a cheap 880G motherboard. On the surface, they're similar in cost, but 880G mATX motherboards are crazy discounted all the time - I think I paid $40 for the last one I bought (a Biostar) for a low-cost build a month or so ago.
LaneDS said:Will give that a go tomorrow after work. Seems to boot happily now, which is rad, but I'll disable the Marvell controller and find whatever that PII setting is just to play it safe, thanks.
Since I ordered the 750W version of my PSU as a replacement for this one (which may in fact work just fine), I now have to contemplate keeping that. Was thinking about SLI for the GTX 560 ti but haven't looked too closely at wattage requirements yet.
Tashi0106 said:And here it is all built!
![]()
SenseiJinx said:That's a pretty slick looking case. How do you like it? I like the design better than the HAF's, and it's actually in stock, unlike the Lian Li Lancool I was looking at. How's the airflow? Would you recommend installing another fan or two in that case (possibly a side fan)?
Nice looking build, by the way.
TommyT said:Might have been covered, did a quick scan but... Is there a reason you have the Hyper212+ aligned that way opposed to pointing to the back of the case? Or is it that heat rises and you're blowing it through the top of the case yada yada?
edit: We pretty much have the exact same build save a different keyboard/mouse... now clean those cables up! (CM690II has a rather tight space behind the mobo, but can get it to fit well with some tight zip-ties!)
Actually heat rising doesn't really make any difference. Having your cooler mounted that way is less effective, regardless of the orientation of the fan. You're putting excessive heat either on the CPU (from the GPU) or on the GPU (from the CPU), plus you are totally borking your airflow.TommyT said:Is there a reason you have the Hyper212+ aligned that way opposed to pointing to the back of the case? Or is it that heat rises and you're blowing it through the top of the case yada yada?
Wolf Akela said:PC GAF, I wanna make sure. If I buy a DDR3-1600, it'll work fine on a mobo that only supports DDR3-1333, it's just that it'll only run at 1333 right?
TommyT said:The only issue I've had with it I've mentioned above and in a previous post. I didn't go with an aftermarket cooled 560Ti though, and was having issues with it heating up (prior to setting a custom profile where the GPU fan was running at 80%) so I ordered two new 140mm fans. I installed those an was able to lower the GPU fan speed. It never goes above 65C anymore.
If you have an aftermarket cooled GPU, I'd say no need for any extra cooling (or if the room your pc is in is rather cool). If you set up a custom profile that should fix any need for extra cooling, just depends how much you can put up with the noise from the high fan speed.
edit 2: The case 100% stock is amazingly whisper quiet by the way. So only add fans if you're ok with some noise.
LordCanti said:It sounds like your RAM was just improperly seated, or maybe one of the sticks was bad.
It says 1333 because that is the max supported that is not overclocked.Wolf Akela said:PC GAF, I wanna make sure. If I buy a DDR3-1600, it'll work fine on a mobo that only supports DDR3-1333, it's just that it'll only run at 1333 right?
Hazaro said:Corsait 750W V2 is only $10 more after rebate.
None of the cases in the OP appeal much to you? If not just buy the Rosewill CASE.
http://www.newegg.com/Product/ComboDealDetails.aspx?ItemList=Combo.707906
Well you listed a 750W, so I listed one too.drakesfortune said:No it's not that they don't appeal, it's that the Rosewill case was a good deal, and it looked like it had a good set of features? I don't know though. I currently have a coolermaster case, and that works pretty well, but I find them to be somewhat ugly, at least the one I have. I'd love to have something that looks nice and is as quiet as possible. It's just really hard to figure out which one that is.
Do I really need a 750w supply? I highly doubt I'll ever add another card, will I get any benefit with a 750w supply if I have no plans to do that in the future?
The BitFenix Shinobi looks nice, I just don't know if that case is okay with this rig. That's my main problem, I don't know if there are any size issues or anything, especially with the larger size of the GPU I'm buying.
iSurvivedTheOutage said:Shinobi is so sexy...too bad theyre sold out![]()
Hazaro said:Well you listed a 750W, so I listed one too.
I'd recommend the XFX Core 550W if you are running 1 card.
Antec BP550 is you want modular, but it's not as good a PSU.
Lotta room in the Shinobi.
http://www.anandtech.com/show/4460/bitfenix-shinobi-the-budget-ninja
chaosblade said:That Shinobi looks like a great case for the price. That window looks awful though. Survivor looked a bit small, but it seems the HDD cage comes out to fit longer cards so that works.
Format the HDD in Windows Disk Management.HotHamWater said:My new build is working fine, but Windows isn't displaying my new HDD. I've got Windows installed onto a 200GB drive, and this new build has a secondary 1TB drive that isn't being displayed in the normal way.
It's in the bios, and shows up using "list disk" in disk part. Am I missing something here? All drivers are up to date.
I'm pretty sure the one they have in stock, which is the regular black one, doesn't come with a window. I agree too, I have no desire to have a window on my case, it makes no matter to me.