Yeh, I found the manual and it looks kinda complex but I'll enjoy the challenge I think!
Looks like you can plug into a PC via Ethernet and set up a bunch of stuff so that could be interesting.
Upscalers, CRTs, PVMs & RGB: Retro gaming done right!
- Thread starter IrishNinja
- Start date
- Status
Yeh, I found the manual and it looks kinda complex but I'll enjoy the challenge I think!
Looks like you can plug into a PC via Ethernet and set up a bunch of stuff so that could be interesting.
I can't help, but this one of the worst article ever written about color
temperature. No kidding!
It completely misses the point and draws some odd conclusions
many people here fall for it, unfortunately.
One of the most important thing in understanding the need for
color temperature correction lies in the understanding about how
the eye adapts to the brightest light it sees making it its new white,
independent of the lights color, and readjust its color perception
with respect to this new white.
This is where a proper article about color temperature shoud start.
Bar81
Member
Going to cnet for determinative opinions is questionable in and of itself so this isn't surprising.
lem0n
Member
I'm new to old school gaming, but want a monitor to play my old PSX on. I found this near me. Good deal? Anything I need to know about these? Sony PVM-14n5u
http://phoenix.craigslist.org/evl/ele/4806236313.html
http://phoenix.craigslist.org/evl/ele/4806236313.html
Can't tell without seeing if it has RGB inputs. Not all PVMs do.
Doesn't do RGB so in my opinion not worth it. I would say hit up ebay and look for the Olympus OEV series monitors, they used to be grossly underpriced in comparison to the exact same Sony PVM models they were based on. But it appears as though people have become savvy as the most recent OEV-203 auction ended at $150 or so and I paid $75 for mine.
lem0n
Member
Hey thanks for the input guys, but I got a call back before I saw your replies, and he took $50 for it. He was 4 miles away, too. I have my PSX running through S video right now and it looks stunning. It had the manual too, so I'm going to read up on it tonight. So far, so awesome! Might keep an eye out for an RGB one.
The S-video input on PVMs is actually very high quality. For a PS1 it's not that much of a step down compared to RGB. You're only going to suffer on consoles where S-video is not an option, because even a PVM can only do so much with composite video.
On my PVM I use S-video for my SNES, PS2 and Dreamcast so I can save up some ports on my SCART switch (a 5 port Bandridge) for consoles where RGB is essential. Maybe one day I'll buy a second switch, but for now it really doesn't bother me, there is very little visible difference.
xD Will put it on my list.
lem0n
Member
Completely unrelated. You got a sweet of user name.
HA! My man! Happy to see someone else here with great taste.
BONKERS
Member
Fair Enough. :=}
Pancakes R Us
Member
Wow, looks neat! What size is the PVM?By the way,
sixteen-bit
Member
14 from the name
By the way,
Enjoy. Because there were no RGB sets available in your area, you certainly did well for yourself. The s-video on PVMs is still a pretty great option.
megamanfan1500
Neo Member
found this video in my feed this morning featuring the "Waka Up Scan Converter" for the PS1/2. Came out back in '96 and is pretty rare. Check it out:
https://www.youtube.com/watch?v=KhLjo2nNz7U
https://www.youtube.com/watch?v=KhLjo2nNz7U
I'm into vacuum tubes at the moment.
sixteen-bit
Member
Neat piece of hardware. I like that it's officially branded.
lem0n
Member
Thank you, guys! I am very happy with it. S video will do me just fine for now, but I'll keep an eye out for an RGB one.
Moor-Angol
Banned
which cable may I use for hooking up a PS2 with XRGB-mini?
seems like RGB cable is a little expensive, component or D-Terminal give a good output? I would use it for both PS1 and PS2 games
seems like RGB cable is a little expensive, component or D-Terminal give a good output? I would use it for both PS1 and PS2 games
For 240p games (e.g. most PS1 games), I use the RGB cable made by this seller for my XRGB Mini:
http://www.ebay.com/usr/retro_console_accessories
I think it runs about $30 or so. She is probably away for the holidays, so her stock will probably reappear in January.
For everything else, (e.g. anything involving 480i or 480p), I prefer 1st party Sony-brand component cables going straight into my HDTV, bypassing the XRGB-Mini altogether. It doesn't do as good a job with those resolutions as my HDTV's internal scaler.
I had one of those and it's only for component to vga.Hi guys, its me again
Does anybody know if the XCM 1080P VGA Box works with the dreamcast?
Thanks bro's!!
GayForMaster
Banned
So I tried swiss on the SD Media Launcher and at 240p it looks worse than 480p. But this is through my 50" HDTV at component. I can only assume it'll look better on a CRT, or my PVM but I'm unable to test it on my PVM at the moment.
Yeah, that's not surprising. Sending 240p video to a modern television is like shouting morse code at someone over a phone.
GayForMaster
Banned
Haha, I don't know I just expected it for some reason to look good... actually, the quality it produced reminded me exactly of the time I used to own that terrible Scart to HDMI or Scart to Component converter box. I'll report back later with PVM results when I can do it.
Why would you do that? Lol.
My Extron switch just arrived. Holy cow...
Apparently I can do some presets so I can use it for RGB or component by using multiple inputs at once. I might just test it with composite first though so I can make sure it works, then I'll set it up maybe when I move into my next place, cos it's huuuge lol.
My Extron switch just arrived. Holy cow...
Apparently I can do some presets so I can use it for RGB or component by using multiple inputs at once. I might just test it with composite first though so I can make sure it works, then I'll set it up maybe when I move into my next place, cos it's huuuge lol.
I recently bought a pair of cool superior Super Famicom controllers to replace my aging, ugly North American SNES controllers.
They are in superb condition, however as is usual with Japanese controllers from that era, the cables are like less than a meter long or something. What the fuck were they thinking back then? I mean I know that Japanese houses are small but that's just insane. I wonder how many Japanese consoles were broken due to people tripping on them, since you basically had to put the console right in the middle of the room so you can actually reach the controllers.
Thankfully controller extensions are cheap and easy to buy nowadays.
They are in superb condition, however as is usual with Japanese controllers from that era, the cables are like less than a meter long or something. What the fuck were they thinking back then? I mean I know that Japanese houses are small but that's just insane. I wonder how many Japanese consoles were broken due to people tripping on them, since you basically had to put the console right in the middle of the room so you can actually reach the controllers.
Thankfully controller extensions are cheap and easy to buy nowadays.
NormalFish
Banned
that looks awesome
so are each of those input/outputs some sort of universal plug?They did make SNES controllers with the colored buttons for the US market
Nintendo didn't. You're probably thinking of third party controllers such as the ASCIIPad which did have the colored buttons here.
that looks awesome
Yeh just BNC. I'm so excited can't wait to use it! If I'm clever I could set it up on top my PVM but that will require some tidying... It's pretty flat though I think I could put my basket of games on top of it somehow...
Pretty sure his post contained a typo.
You could just grab two of these:
http://www.ebay.com/itm/like/111414432231?lpid=82
Yeah that's the plan. I also have extensions for my PC Engine and Neo Geo controllers. Those silly short cables...
Obviously, PAL gamers had the best of all worlds during the 16 bit era....
But they don't have "Super Famicom" written on them though.
MMaRsu
Gold Member
Aww bummer.
Whwre could I get a vga box for thr dc? from a reliable site that ships to the netherlands?
baphomet
Member
Google beharbros and get one of theirs.
Now that you mentioned it, I had the opportunity to get one of these broadcast bnc matrixes for a dollar and didn't realize how useful they were at the time. Truly a missed opportunity on my part.
Kicking myself pretty hard right now.
BONKERS
Member
Yeah, I was looking at getting one of these since it does component too.
Need a HQ component video switch for my CRT
I just use the PAL controllers with my SFC
I'll probably run from PVM to switch box, then to SCART switch, so I can use this new box to switch between SCART and component without having to get behind the PVM. Eventually I'll get rid of SCART altogether though I think. Hate the connectors tbh.
entremet
Member
By the way,
Beautiful. Love Sony industrial designs.
sixteen-bit
Member
Interesting RGB TV mod
http://mikejmoffitt.com/wp/?p=284
http://mikejmoffitt.com/wp/?p=284
I remember reading about his previous hack, where he simply drove the colour and sync signals to the electron beam. It really shows the simplicity of RGB, and why it's really the primary mean of displaying stuff on screen. The original signal goes straight from the PPU to the beams themselves and is directly useable without any decoding, processing or what have you. CRT are lag-free, the only delay is the speed of electricity in your AV cable (≈half the speed of light).
[edit] Don't try this at home guys, there is a very real risk of death when manipulating the insides of a CRT.
- Status
Similar threads
- Poll