"+set m_smooth 0" in launch options
Doom (2016) PC performance thread
- Thread starter JaseC
- Start date
"+set m_smooth 0" in launch options
iRAWRasaurus
Banned
reposting for the new page.
Dictator93
Member
iRAWRasaurus
Banned
0o0
dev mode?
in my doom game?
YES
Can you enable vulkan in console?
To be honest, I have no idea why that is showing up. I did noting besides mess around with the video settings. In addition, when I downloaded the game using family share with a friend, I already had a save file on when I first started the game.
Hm, it'd be a shame if the GTX 670 can no longer exceed PS4 performance at the same settings (taking the VRAM limitations into consideration)
Wonder if Vulkan brings it over the top.
Nocturno999
Member
Even at 1600X900 is almost full VRAM usage.
Edit: At high settings 1920x1080 VRAM usage frees 200mb wtf
Good god... AMD is in the dump. I definitely need to wait for the Vulkan patch, whenever it might come...
In Steam: Doom/properties/set launch options: "+set m_smooth 0" (without quotes).
Makoto-Yuki
Banned
so my 290 will not be much better than a PS4? I only have an i5-4590 nevermind an i7-5960X. i would need to lower settings to medium to hopefully achieve a solid 60fps at 1080p?
Dang my 970 running very good..still getting a GTX 1080 though and poor AMD that one tanked so damn hard.
Templar Wizard
Member
my pc xbox one controller isnt working with the game, anyone else have the same issue?
SirMossyBloke
Member
It's been fine for me. Even if I turn on the controller while the game is already running. Have seen reports of other people with the issue though.
They said "really, really shortly after launch" lol
At that rate, maybe I'll try my luck with the steam summer sale.
AndyMoogle
Member
Dropping shadows to medium or even low should be all that's necessary. Your CPU won't be a problem at all.
Bjoern the Smexy
Member
AWWW YISSS IT WORKS!
I have a Medion Erazer laptop with these specs:
Intel i5 M460
nVidia GeForce GTX 460M
8GB RAM
And it runs at a solid (and, for me, playable) 20-30 fps with most settings set to Medium or Low and only DoF AA turned off. It might not be the perfect 60 most people need, but I'm just happy that my old thing can still play this game in a playable state.
This is a post of a happy man with low expectations.
EDIT: Changed some settings and now I get everything between 30 to 60+ fps. Niiiiiiccccceeeee!
I have a Medion Erazer laptop with these specs:
Intel i5 M460
nVidia GeForce GTX 460M
8GB RAM
And it runs at a solid (and, for me, playable) 20-30 fps with most settings set to Medium or Low and only DoF AA turned off. It might not be the perfect 60 most people need, but I'm just happy that my old thing can still play this game in a playable state.
This is a post of a happy man with low expectations.
EDIT: Changed some settings and now I get everything between 30 to 60+ fps. Niiiiiiccccceeeee!
CyanideFuse
Member
Does the game need to be restarted when alterations are made to the in-game vsync as it doesn't seem to work for me; the framerate remains unlocked. I tend to have adaptive vsync set globally within the control panel but was just messing around to see if there was any difference with the in-game vsync.
I will be trying the game out on our secondary gaming PC that has a 670. It will be interesting to see what settings need to be altered so that 60fps is manageable.
I will be trying the game out on our secondary gaming PC that has a 670. It will be interesting to see what settings need to be altered so that 60fps is manageable.
So I need some help guys, this probably belongs in a different thread but I just installed the new drivers for DOOM and about halfway through the express installation the screen cuts to black and has been flashing non-stop. I have no experience with video drivers, so how to I fix this? I have a GTX 760 btw.
Please post back asap
Collateral22
Member
I used DSR for it and it was around 50s mostly everything on Ultra
Kenzodielocke
Banned
How you guys can play at a flactuating frame rate is beyond me (without Gsync). It's not directed at you, but I read many posts of people that play with a flactuating frame rate.
It's either locked 30 or 60fps for me.
CyanideFuse
Member
Will do. It probably won't be until tomorrow but I will post my findings when I get it plugged up.
there is a fairly significant performance difference between a titan x and a titan black though.
kitchenmotors
Banned
You just said a single Titan, didn't know you were running an X.
The Titan X is the Maxwell-based Titan. You're thinking of the Titan Z, which is a dual-GPU Titan Black.
Yeah, it's a little confusing.
Adry9
Member
RIP 7950. I need an upgrade.
EDIT: 960 almost 60fps avg and my 7950 barely holds 30? WTF???
Nocturno999
Member
Setting FPS to 61 via Riva Tuner solved the terrible stuttering the game was having even @60FPS.
Game works smooth when it hits 60~61 and tearing started to get noticeable with V-Sync off.
Game works smooth when it hits 60~61 and tearing started to get noticeable with V-Sync off.
Collateral22
Member
Nah I don't play on 1440, I just tried it out. Locked 60fps Ultra at 1080 for me all the way. Framerate is priority for me.
Haloid1177
Banned
6700k
16 GB DDR4-3200
980ti
Getting about 100 FPS average at 1440p on ultra with shadows at nightmare. Game is running like a dream so far.
16 GB DDR4-3200
980ti
Getting about 100 FPS average at 1440p on ultra with shadows at nightmare. Game is running like a dream so far.
JebaÄBiedÄ
Banned
770 4gb
i5-3570
PC or PS4?
i5-3570
PC or PS4?
7DollarHagane
Banned
Is the multiplayer less demanding? I'm getting above 90 fps on all ultra in multiplayer with my 970
AMD 8320 @ 4GHz
16GB ram
760 GTX SLI (obviously in single card mode)
Edit: Should mention I'm running an ultrawide at 2560x1080.
All setting on high except particles and reflections, those are on medium. Resolution scale set to 90 and AA set to TAA.
Getting 40-60 FPS with drops to 30 during major fights. Can't wait for SLI support.
I found a post on the steam discussions that offered a fix for those running 7xx series cards who experience unexplainable FPS drops in areas with fog, steam, etc. This usually happens after a death or level change or graphics setting changes. I tried it and it worked for me, but your experience may vary. Find the doom cache folder located under c:/users/username/appdata/local/idsoftware/ and delete the DOOM folder. Restart the game and those drops should stop. It appears to be a temporary fix as the drops can come back.
16GB ram
760 GTX SLI (obviously in single card mode)
Edit: Should mention I'm running an ultrawide at 2560x1080.
All setting on high except particles and reflections, those are on medium. Resolution scale set to 90 and AA set to TAA.
Getting 40-60 FPS with drops to 30 during major fights. Can't wait for SLI support.
I found a post on the steam discussions that offered a fix for those running 7xx series cards who experience unexplainable FPS drops in areas with fog, steam, etc. This usually happens after a death or level change or graphics setting changes. I tried it and it worked for me, but your experience may vary. Find the doom cache folder located under c:/users/username/appdata/local/idsoftware/ and delete the DOOM folder. Restart the game and those drops should stop. It appears to be a temporary fix as the drops can come back.
UnrealEck
Member
What settings is PS4 using? I know it's using up to 1080p so that's hard to compare with since you can't set a dynamically scaling resolution on PC. But have the settings been fully compared or revealed officially?
Could have sworn DF said medium across the board with TXAA. I could be wrong.
MikeE21286
Member
I'm actually amazed I can even play this at 1080p on my 570 with an i5 2500k@4.4ghz. Have been getting around 30fps in the first sections of the game.
1080s can't launch soon enough...
1080s can't launch soon enough...
Specs?
The 2500K is a beast, I'm only upgrading my 780 with a 1070 and probably try to OC the CPU the closest to 5GHz.
SirMossyBloke
Member
Huh..I wonder if my cpu isn't using all cores. I'm getting a solid 60fps with vsync on, but maybe I can push my 970 to 1440p DSR with this.
Unknown Soldier
Member
What does this do? The game should be using all cores already...
BackFromThePast
Banned
Btw, for those of you who didn't know, you can change your default steam cover for this game and put on the alternate version. Right click it in your steam library and click "set custom image" and upload this:
Dictator93
Member
Smooth Operator
Member
AndyMoogle
Member
Btw, for those of you who didn't know, you can change your default steam cover for this game and put on the alternate version. Right click it in your steam library and click "set custom image" and upload this:
Nice, thanks!
FlammableD
Banned
I have a 770 and an i5-2500K, am I better of getting this on PS4?