Which kickstarted my love for the Dom-line in UC.
The Official Gundam Thread of Gunpla, Origins, and 35 Years of GUNDAMUUUU!
- Thread starter Snaku
- Start date
- Status
Which kickstarted my love for the Dom-line in UC.
Megalosaro
Banned
So my birthday was on Thursday. Today I went over ny parents house to celebrate my bday.
They got me gubpla for my bday. The hguc victory 2 and the hguc full armor unicorn destroy! Which of these op suits should I build first
They got me gubpla for my bday. The hguc victory 2 and the hguc full armor unicorn destroy! Which of these op suits should I build first
My parents have to always ask me what I want. Your parents actually know what you want. lol
So I'm rewatching G Gundam for like, the third time and can we talk about how the Devil Gundam can raise the dead?
Like what the heck was Dr. Kasshu thinking on that phase of development?
As a side note, if a woman was the most suitable pilot, who had Dr. Kasshu intended to have pilot the thing?
Like what the heck was Dr. Kasshu thinking on that phase of development?
As a side note, if a woman was the most suitable pilot, who had Dr. Kasshu intended to have pilot the thing?
Megalosaro
Banned
They asked for suggestions. I gave them a list of kits
Their main goal was the restoration of the planet. The fact that it can do that meant that raising the dead was probably expected, but I don't think he planned on letting the Ultimate Gundam do that. And I think that finding a suitable female pilot wouldn't have been too hard, just needed the right tests.
It kinda malfunctioned when it hit the earth...possibly because of Kyoji's emotions as he lay there suffering.
Hey GundamGAF, I don't post here often but I recently bought Toru Furuya's album Heroes ~ to my Treasure ~ which is a tribute to characters he played in anime like Sailor Moon and Dragon Ball Z. The first track "Nemuttamama dewa" and the last track "Lalah no Yasoukyoku Nocturne" are both dedicated to Amuro Ray. You can read an interview about it here. Thought I'd share it with you guys.
Oh, that sounds about right.
ShinRPGamer
Member
Build Fighters has not been dubbed and probably won't be dubbed for a long while. Sunrise has for whatever reason left us North Americans in the dust with regards to Gundam after Bandai Entertianment got killed and with the exception of Gundam Unicorn, physical releases have dried up over here, none of the shows have been rescued (or are not allowed to be rescued) and any legal streams they give us are sub. only.
NintendoGal
Member
Wanted some advice/thoughts on Gunpla if anyone would be so kind to chime in:
http://www.hlj.com/product/ban957469/Gun
I just picked this kit up, never done a MG before. I've also never done the fancy sanding/painting, that I see what Gunpla is all about it seems like. I've been having fun just putting Gundam models together, whatever the size (not that I've done too many) to be honest.
Do you have to sand/glue/etc. on these MG? I guess I'm asking a dumb question which boils down to: I'm doing it wrong aren't I?
http://www.hlj.com/product/ban957469/Gun
I just picked this kit up, never done a MG before. I've also never done the fancy sanding/painting, that I see what Gunpla is all about it seems like. I've been having fun just putting Gundam models together, whatever the size (not that I've done too many) to be honest.
Do you have to sand/glue/etc. on these MG? I guess I'm asking a dumb question which boils down to: I'm doing it wrong aren't I?
EvilKatarn
Member
You bought a Zeta.
I'm sorry.
But to answer your question, sanding is optional and you definitely don't need glue.
I'm sorry.
But to answer your question, sanding is optional and you definitely don't need glue.
The only reason the HG is good is because it drops the Transformation.
Zeta's Transformation has so many moving parts and the legs need to be able to do so much it simply causes issues when being made into a plastic model kit.
NintendoGal
Member
See, but I don't really plan on displaying it, no room. So the flimsiness isn't too much of a bother, but just from the few posts, it looks like it's going to be a fun and frustrating experience already!
I had assumed that it's ability was more to take extant life and extrapolate from there, or use fossils or something and recreate. But Zombie Gentle Chapman's possessed corpse walking around for 20ish episodes is crazy. I mean think about it: The Devil Gundam can possess the living among your army as easily as it can claim the dead and put their talents to its own use. I know this thing malfunctioned, but it's still horrifying to think that this potential existed.
X-1 and Full Cloth are full releases.
Crossbone X-2 and X-3 are online hobby shop exclusives that get their prices jacked up so they can be far more then they're worth.
X-1 is the much better release.
Full Cloth is just a bunch of stuff bolted on to X-1 and the Full Cloth Amor isn't very good and some of the connections are fucking awful.
My parents just guess what I want and they're usually very off lol. Also my mom is into quantity over quality so I end up getting stuff like
There have been a few good things over the years though lol
Thanks, I'll go for the X-1. Also crazy how many versions of the Deathscythe there are.
Well Deathscythe currently has 5 major versions I think?
Deathscythe TV/EW
Deathscythe Hell TV/EW
Warlock.
You have about 16 if you count stuff like Deathscythe Innocent and Deathsycthe Guilty.
It's basically the most amazing/terrifying weapon ever created in any Gundam Universe, up there with Turn A/X.
PaulExcellent
Member
My RX-78-2 got delayed until Tuesday. 
I guess I'll panel-line the pink statue until then.
How much is the 7-11 Unicorn Gundam worth?
There's one on Amazon for $40+ and I'm tempted...
I guess I'll panel-line the pink statue until then.
How much is the 7-11 Unicorn Gundam worth?
There's one on Amazon for $40+ and I'm tempted...
Mobile Fighter G Gundam 35
Remember that time Chibodee Crockett hada really suggestive training sequence sex with four women at once?
No? That's okay. Neo-America remembers.
EDIT: Doesn't matter, Domon's a Newtype:
It even plays the sound effect.
Remember that time Chibodee Crockett had
No? That's okay. Neo-America remembers.
EDIT: Doesn't matter, Domon's a Newtype:
It even plays the sound effect.
My RX-78-2 got delayed until Tuesday.
I guess I'll panel-line the pink statue until then.
How much is the 7-11 Unicorn Gundam worth?
There's one on Amazon for $40+ and I'm tempted...
shipped? that sounds ok given that it's an import item
PaulExcellent
Member
It actually costs like, $50.
I think I'll just get the HG full-armor Unicorn Gundam and use the rest for another HG or something.
Me too.
kiunchbb
www.dictionary.com
Most mg doesn't need glue, however once in a while you run into some loose part or accidentally sanded the connector. Just use normal super glue.
If you want to remove seamlines (the thin line between 2 connecting pieces) you will need special glue and sand paper.
Sand paper, clipper, and hobby knife is a must to remove nodes, otherwise it will look bad and hurt the plastic.
Painting look nice but it is optional, a lot of mg looks great without it.
You may still want to do panel line with micro pen, and buy a can of top coat, it is very easy and made a huge difference.
This video should cover all the basic of you don't want to paint.
http://youtu.be/U2F7zVuaf4U
Same over her, though I like it with the Banshee.
distantmantra
Member
I've got a Char-piyo keychain from a 2006 issue of Gundam ACE, he's been around forever.
Can't say I agree, green and white is a godly color combination.
Maybe if you were to include a particle effect, but on a stationary Gundam model it doesn't really look great. At least not neon green.
Megalosaro
Banned
Broke the faceplate on my V2.
I'm not even sure what happened. I was cutting the piece out of its tray, and when when I snapped it out , the piece broke in half. I'm trying to super glue it back together, but I dunno. I'm sure there is some sort of fix. Maybe I can just glue both pieces directly to the head lol
Edit: The operation was a success. The super glue held, and I was able to put the face plate on the head. There is a noticeable crack, but it doesn't look bad.
I'm not even sure what happened. I was cutting the piece out of its tray, and when when I snapped it out , the piece broke in half. I'm trying to super glue it back together, but I dunno. I'm sure there is some sort of fix. Maybe I can just glue both pieces directly to the head lol
Edit: The operation was a success. The super glue held, and I was able to put the face plate on the head. There is a noticeable crack, but it doesn't look bad.
Yeah man. the real small pieces, the thin ones...you need to be extra careful. what i do with those, is that i dont try to snip them out at the connecting points - i cut the thick runner frame instead until i have a chunk of the runner that contains the piece, then i take my knife to remove the piece from the now-sectioned sprue. This way you dont end up cracking a piece from the force of snipping it close.
kiunchbb
www.dictionary.com
^ Instead of being a glue, this thing melt the plastic to hold 2 pieces together. You just need to sand it back to flat surface after it cured.
If the damage is really bad you might need some filler to go between the 2 pieces.
donkey show
Member
defnitely more of a teal than neon green on the awakened version and not the 7/11 one lol
that's pretty nice though so expensive. are you paying this off with the neo zeong money lol
donkey show
Member
donkey show
Member
Well, that's that. Cancelled the preorder going to the states and bought the Neo Zeong locally which I'll hopefully pickup later after work. FUCK YOU STUPID SHIPPING AND UK CUSTOMS! 
EDIT: YAS! Just got the confirmation and will be picking it up after work!
EDIT: YAS! Just got the confirmation and will be picking it up after work!
- Status
Similar threads
- Locked