I'm guessing they locked the FPS so it wouldn't go up to like 2000 or whatever, but locking it at 30 seems really dumb. My first thought when I booted up the game was "This shit will be a broken mess..", fortunately it was only the menu.
GTA V PC Performance Thread
- Thread starter noomi
- Start date
I'm guessing they locked the FPS so it wouldn't go up to like 2000 or whatever, but locking it at 30 seems really dumb. My first thought when I booted up the game was "This shit will be a broken mess..", fortunately it was only the menu.
LiquidMetal14
hide your water-based mammals
I think I've settled on just playing this absolutely maxed except for just 2xMSAA as the game won't let me go 4x due to VRAM limitations. Game runs at over 60fps pretty much all the time so I'm content.
chromatic9
Member
i7 930 3.8ghz
GTX 970
With everything under Graphics set to highest using FXAA and reflection msaax4 I'm getting around 90fps at 1080p. Not changed any extra shadow options under advanced graphics. 1440p I get 58-62fps
GTX 970
With everything under Graphics set to highest using FXAA and reflection msaax4 I'm getting around 90fps at 1080p. Not changed any extra shadow options under advanced graphics. 1440p I get 58-62fps
I've found this somewhat happening more and more for some reason. AC Unity, while not a great running game, tended to have even shittier performance on some of the menus too.
Both games with heavy online functions, so maybe tied to that?
There's no way
justgames7604
Member
The charts in OP show that AMD cards aren't performing as well as they should. I got a 290X. Any word on an updated driver (that actually works well) for GTA V?
Oh I have not tried it with the Nvidia Control Panel, I should, though. Right now, when the game boots up fresh, it does not matter what AF is set at, the game has 0AF, so I have to go into the settings, set it to 8AF, accept, change it back to 16AF and then it works properly.
chromatic9
Member
No, it's not.
It's MSAA + custom resolve with a temporal component.
The slightly blurry look is intentional as traditional box filter cannot be stable in motion. (page 23.)
Getting kind of poor performance on my setup with 3 Titans @ 4k/60Hz with everything turned up to the max. FPS in benchmark ranging from 18FPS-30FPS. I guess I'll have to start turning down a lot of stuff. Hard to believe 3 Titans just isn't enough these days.
Have you played the game and not just the benchmark. You should be more than fine. The scaling is pretty great.
What are you guys taking pics with? I can't get FRAPS to take them or Precison X. I can get FRAPS to run the fps monitoring in the background though...
1080p
1440p
I've not got into the country side yet, just walking around
Oh you've got no MSAA, right
Allnamestakenlol
Member
Had to drop grass down to high. It was just too much with everything else maxed (no aa) at 4k. I was getting drops down to about 25fps. Lol On the plus side, this game has great sli and cpu scaling. Both my 980s run at about 80-100% and all 4 cores on my 3570k (4.4ghz) are fairly evenly split at 60-100% depending on what's going on. I get 60fps in the city and about 45-60 in the countryside.
Getting kind of poor performance on my setup with 3 Titans @ 4k/60Hz with everything turned up to the max. FPS in benchmark ranging from 18FPS-30FPS. I guess I'll have to start turning down a lot of stuff. Hard to believe 3 Titans just isn't enough these days.
what is the SLI scaling like? A pair of Titan Xs seem to put out way higher numbers and 3 of the original Titans should be roughly comparable to that assuming SLI scaled well.
chromatic9
Member
Will be trying that next. Well this is not heavy on the CPU, I know my CPU is many times faster than a AMD Jaguar but its from 5 years ago can be had on ebay for £40 these days.
Yeah it's a little tricky for us with 980 SLI. Turning off PCSS and MSAA somewhat helps, although there's some microstutters whilst driving in the country for me.
jim2point0
Banned
1080p
1440p
I've not got into the country side yet, just walking around
The countryside is what murders FPS. I've had drops to 40 FPS @ 2560x1440. On a TitanX....
What do you have displaying the overlay\FPS?
Wag
Member
It is running good for me unless I turn on the Advanced Graphics features then it starts to stutter. Maybe turning on adaptive V-Sync would help? Also, would there be an advantage running it Borderless Windowed over Fullscreen?
GearDraxon
Member
It worked for me, although I chose "On" instead of "Adaptive," as I was getting screen-tearing...which I dislike over pretty much any other graphical issue.
chromatic9
Member
MSI Afterburner. You can change some colours in rivatuner.
Coolbgdog12
Member
Any fix for the 59hz issue?? I also still suffer from these pauses and stutters. Besides that the game runs alright for my rig at around 30-50fps with sometimes 60fps in less populated areas.
I also can't play with the streaming textures and assets issue. Things end up not loading until seconds later.
I also can't play with the streaming textures and assets issue. Things end up not loading until seconds later.
On my 980 I can lower a few things to high (and not use the "advanced graphics" extra distance stuff) and get pretty consistent 60fps at 1080p 4x MSAA.
But man, even at 4x MSAA this game is so freaking jaggy. Like I'd rather use 2x MSAA and put stuff to very high, but every shimmers from the cars to the streets to the poles to the power lines. Just creates a real offputting visual effect.
FXAA/TXAA sorta help but they make everything blurry so it's not worth it. 8x MSAA seems like the bare minimum you need to get rid of the jaggy/shimmering in motion, but yeah that's way too expensive for any single card.
It's fine, I'll live with a shimmery game at 60fps; looks and runs nice otherwise, but yeah something about how the world is built, engine is made makes everything ultra jaggy at 1080p.
But man, even at 4x MSAA this game is so freaking jaggy. Like I'd rather use 2x MSAA and put stuff to very high, but every shimmers from the cars to the streets to the poles to the power lines. Just creates a real offputting visual effect.
FXAA/TXAA sorta help but they make everything blurry so it's not worth it. 8x MSAA seems like the bare minimum you need to get rid of the jaggy/shimmering in motion, but yeah that's way too expensive for any single card.
It's fine, I'll live with a shimmery game at 60fps; looks and runs nice otherwise, but yeah something about how the world is built, engine is made makes everything ultra jaggy at 1080p.
I think I remember reading the game has worse lag or something in Borderless Mode.
Uh
My next 4k monitor will have Gsync. When I am playing on my ROG Swift I have no worries about tearing. Switch to 4k and the demons come back. The problem is 4k looks too good -- gearsofwar2toogood.jpg
lordfuzzybutt
Member
This game is making my crave for the acer XB270HU bigger and bigger.
Dries
Member
Have you tried DSR? From what I've read here a 980 can handle 1440p and MSSA x 2.
Allnamestakenlol
Member
With msaa off, my biggest offenders are grass and shadows. But I'm pretty sure my occasional hiccups are due to me running 4k res with max textures. My little cards are putting up one hell of a fight. Lol
The Dear Leader
Banned
I got one at that part, worked fine the next time I tried it though.
EatinOlives
Member
Game continues to never dip below 60fps for me, even during 3-star chases. Haven't gone out into the countryside, though. I'm sure I'll get my first FPS drops there.
I do seem to have the 59Hz or some other microstuttering glitch going on, but I'm too busy playing the game and marveling at the graphics to care right now
.
I do seem to have the 59Hz or some other microstuttering glitch going on, but I'm too busy playing the game and marveling at the graphics to care right now
.Haven't tried DSR yet, but that'll be the next thing I try to see if 1440p @ MSAA 2x is less jaggy than 1080p @ MSAA 4x.
Dries
Member
GearDraxon
Member
#SLITitanXProblems
Mineshaft_Gap
4077th
Game keeps crashing during the
Has happened three times in the same spot. Wtf
funeral scene in the beginning.
Turin Turambar
Member
The charts are outdated, check the ones at guru3d.com. Use last beta drivers.
Agent_Carnage
Member
How well would I run the game at?
I got a Intel Core i5 4690K,GTX 570 and 8GB of Ram.
I got a Intel Core i5 4690K,GTX 570 and 8GB of Ram.
I've had it happen both times I've tried the mission. I guess I'll try again.
Cannon Goose
Member
I have triple buffering in my game. Running fullscreen with driver vsync forced on and in-gane vsync off. I drove through a bunch of fences and bins and the frame rate plummeted to 30 for a moment and the went back to 60 as soon as I was past that spot.
All I had to do to activate triple buffering was alt+tab out and back into the game. I then drove through the same fence and the frame rate only went down to 56.
teacupcopter
Banned
i5 2500K
AMD R9 280X
16GB Ram
I'd love 60fps, what would be the best things to sacrifice while still retaining great visuals? I already turned off Depth of Field because that just annoys me anyway.
AMD R9 280X
16GB Ram
I'd love 60fps, what would be the best things to sacrifice while still retaining great visuals? I already turned off Depth of Field because that just annoys me anyway.
Iacobellis
Junior Member
Knowing I can almost fully max this game out at 1440p on a 970 and get near 59FPS all the time is insane.
GTA IV with ICEnhancer and some settings severely reduced leaves me at a game that hovers between 30 to 55FPS.
Bravo, Rockstar.
GTA IV with ICEnhancer and some settings severely reduced leaves me at a game that hovers between 30 to 55FPS.
Bravo, Rockstar.
If you try DSR try ingame FXAA with it, it gives edges gradients before the DSR downscale/resolve happens.
This improves edges and 'FXAA blur' basically vanishes as it's smaller than pixel in final image.
Not sure what version of FXAA the game uses, but FXAA can reduce shimmering of very thin or pixel sized polygons as it reduces their contrast. (Intended behavior.)
abracadaver
Member
Do you get a 60hz option in the menu or is it 59hz for you as well?
Dries
Member
True. FXAA and DSR work great together.
I wonder why so many people are using costly MSAA. I hardly see anyone using DSR and FXAA.
PHOENIXZERO
Member
The 59Hz is a Windows thing. I've noticed it several times in the past.
Isn't DSR more costly? How high should I go with DSR?
Does anyone know if MFAA works?
And what on earth does Reflection MSAA do?