DjMystix
Member
So splitter isn't an option at all.. Thanks for helping out though This is going to be very inconvenient..
PSVR will pass through 4K but not HDR to your 4KTV
- Thread starter Marty Chinn
- Start date
So splitter isn't an option at all.. Thanks for helping out though This is going to be very inconvenient..
The later. You just have to take the HDMI cable out of the processor unit and plug it into the TV when you want to play games with HDR.
Design oversight. Saw this yesterday.
Simple and elegant. Lol.Basically you do this and solved... and you need to change from "HDMi 1:VR social screen signal" to "HDMi 2
There's some splitters out there that let you toggle between outputs. Dunno if there is one that supports HDR and 4k though.
Allnamestakenlol
Member
brb setting up psvr
Haha, that's what my setup looks like now. I'm way past ready for some fancy all-wireless tech.
George Claw M.D.
Member
Would something like the HDFUry Integral work? Granted it's a $250 solution.
https://www.hdfury.com/shop/splitters/integral-4k60-444-600mhz/
Colbert
Banned
For that money you can buy a second console just for VR purposes!
Just searched a bit, and found this (60):
https://www.ligawo.eu/audio-video-g...gawo-3090060-hdr-hdmi-splitter-1x2/a-3090060/
They claim 4k2k@60 with HDR and HDCP. Not sure if it lives to its claim, but I guess worth looking into. I don't know the brand, though.
https://www.ligawo.eu/audio-video-g...gawo-3090060-hdr-hdmi-splitter-1x2/a-3090060/
They claim 4k2k@60 with HDR and HDCP. Not sure if it lives to its claim, but I guess worth looking into. I don't know the brand, though.
Bitch Pudding
Member
Yeah, this is how it looks w/o sockets and plugged into a PS4 Pro. Still nothing for people who hate any visible cables around their setup, but not that bad.
Yeah, this is how it looks w/o sockets and plugged into a PS4 Pro. Still nothing for people who hate any visible cables around their setup, but not that bad.
Right-o. Most of that stuff is already plugged into your wall.
Caayn
Member
Yeah, this is how it looks w/o sockets and plugged into a PS4 Pro. Still nothing for people who hate any visible cables around their setup, but not that bad.
![QUOTE]You also removed the HDMI cable + splitter to get HDR without needing to constantly swap cables.](https://abload.de/img/psvr2rjuex.png[IMG][/QUOTE]You also removed the HDMI cable + splitter to get HDR without needing to constantly swap cables.)
BigTnaples
Todd Howard's Secret GAF Account
So did we figure this out to where we can easily switch or no?
Hooking up my PSVR in the morning, PS4 Pro is coming.
Hooking up my PSVR in the morning, PS4 Pro is coming.
f@luS
More than a member.
I noticed something strange I didn't see before
On my tv (lg oled c6) when I check input list I have on HDMI 1 which I renamed PS4, when PS4 is on , two under tab called automatically by the tv PS4 V , PS4 (game). Will check with pro I wonder if really hdr won't work if the good input is used.
On my tv (lg oled c6) when I check input list I have on HDMI 1 which I renamed PS4, when PS4 is on , two under tab called automatically by the tv PS4 V , PS4 (game). Will check with pro I wonder if really hdr won't work if the good input is used.
AbandonedTrolley
Member
How about a 4K HDR splitter where you can change the input? One for PSVR and the PU, another for direct PS4 HDR to TV.
infinityBCRT
Member
I don't think a splitter will work because it will probably introduce lag. A switch would work though. My way to solve this when I eventually get a PSVR is two manual switches plus 3 0.5ft hdmi cables. You can create a passthrough of the breakout box. Wire from PS4 goes into switch 1. Wire from TV goes into switch 2. Then on the side with 2 hdmi ports, the switches hook up to each other and switch 1 goes into the breakout box hdmi in, and switch 2 goes into the breakout box hdmi out.
Youd just need to hit both switches to go between PSVR social screen and PS4 HDR screen.
Youd just need to hit both switches to go between PSVR social screen and PS4 HDR screen.
DJ Lushious
Member
I presume you're talking about swapping HDMI cables between the processing breakout box and directly to the PS4 Pro. The easiest way to switch is to simply swap HDMI cables every time. It totally sucks. Every time I'm done with my PS VR, I swap the HDMI connection to my PS4. I wonder how much abuse the HDMI port on the breakout box and the PS4 will last with this constant swapping. It's maddening that Sony did this.
A HDMI splitter will not work and not because it will introduce lag (it won't). The way HDMI works, it'll go by the lowest common denominator HDMI spec between X number of splits. So, in the breakout box's case, it'll still default to HDMI 1.4.
Find me a 4K HDMI 2.0a HDCP 2.2 compatible switch that is affordable and I'll invest in the company. Haha!
nycgamer4ever
Member
I know it's a little inconvenience but it's literally one switch of two hdmi cables that should close together. Unplug the hdmi from the psvr processing unit, unplug the hdmi from the ps4, plug the hdmi from the psvr unit into ps4. done.
DJ Lushious
Member
It's an oversight that is beyond ridiculous. Between HDMI 1.4 and no UHD support on the PS4 Pro, I am left scratching my head on Sony's logic behind these decisions.
I read that splitters run at the lowest quality for all connections, but if I bought a 1x2 4K HDR splitter and when playing HDR unplugged the connection going to the VR the only connections would be all 4K HDR meaning the signal would go through?
If this works i will probably go this route, I would rather unplug a single cable from a splitter and risk cocking up the connections on something that costs £50 instead of something costing £350
If this works i will probably go this route, I would rather unplug a single cable from a splitter and risk cocking up the connections on something that costs £50 instead of something costing £350
DJ Lushious
Member
I'm a bit confused on the sentence structure here, but if I got the point correctly, then yes. As posted above, HDMI will always default to the lowest HDMI spec if multiple version signals are introduced into the same chain (ie splitters).
f@luS
More than a member.
Maybe (I don't believe it but still ) it will work then 😅
infinityBCRT
Member
Sewell. They are 20 bucks a pop I think.
DJ Lushious
Member
What part are you replying to?
f@luS
More than a member.
I still ain't know how I will manage it. It's annoying to go behind my tv as I made holes for tables on my stand. And I have only 3hdmi on my tv. All 3 are currently uses (Xbox / PS4-psvr / tv box )
I will need to take of the cable from PS4 to psvr and plug it into my tv where my psvr is connected now, every time I want to switch ? Nothing simpler ?
I will need to take of the cable from PS4 to psvr and plug it into my tv where my psvr is connected now, every time I want to switch ? Nothing simpler ?
DJ Lushious
Member
Nope, nothing simpler. It's a right pain-in-the ass, having to switch HDMI cables all the time. And in my case, I then have to redo the audio settings to change to 5.1. My receiver is 7.1, so that is what it reports to the PS4, but I do not have the extra two channels.
Marty Chinn
Member
Every time you want to play though? That's pretty damn irritating, plus not everyone has a setup that makes it easy to swap cables constantly. It's not so simple for everyone.
infinityBCRT
Member
HDMI switch that supports HDMI 2.0a/HDCP 2.2. On a phone. Not easy to cut swaths of text lol.
nycgamer4ever
Member
I'm pretty upset about the decisions to not have UHD "disk" support, it's probably just a push for digital content. Been contemplating getting an xbox one s to play uhd movies but held back by the abysmal amount of available movies to buy so far.
f@luS
More than a member.
I really hope it does.
Or else I'll keep my normal PS4 for psvr (j/k won't have 2 ps4under my tv )
nycgamer4ever
Member
I know it's an inconvenience and a crazy omission but the psvr and processing unit probably was in development much earlier than the hdr tech (it's not even finalized yet and most units just barely make the cut for the requirements) This always happens with new tech that haven't been finalized yet.
In any case it's a pain. I hope there is a work around soon. Until then I'll just have to deal with it.
Ghost Lynx
Member
Are you referring to this?
https://sewelldirect.com/2x1-or-1x2-hdmi-bi-directional-switch-with-hdcp-passthrough
I couldn't find any evidence that it supports 2.0a... Do you know for sure that it does?
I'm looking for a switch that could solve this annoying problem
I'm saying the splitter has 1 in and 2 outs
Input Direct from PS4
Out 1 to 4kTV
Out 2 to processing box for PSVR
If both outs are plugged in then it will send the lowest signal to both the TV and processing box, but if i unplug the HDMI from the splitter going to the PSVR processing box the only signal is to the TV itself meaning i should then get full 4K + HDR as it is the only output.
I'd still have to unplug a cable, but it's much better than swapping cables over and plugging in and unplugging leads in the Pro itself which could wear the connectors out over time.
DJ Lushious
Member
4K @ 60Hz implies HDMI 2.0, but it definitely leaves us in the dark on 2.0a. Looking at its price, compared to other HDMI 2.0a switches out there, I'm going to presume definitely not HDMI 2.0a compliant.Are you referring to this?
https://sewelldirect.com/2x1-or-1x2-hdmi-bi-directional-switch-with-hdcp-passthrough
I couldn't find any evidence that it supports 2.0a... Do you know for sure that it does?
I'm looking for a switch that could solve this annoying problem
infinityBCRT
Member
So its cheap because its just a dumb manual switch, there's no logic inside, no power even. Is there a difference between HDMI 2.0 and 2.0a cables? because thats all this is internally, just a cable. There's no logic associated with it, so if the HDMI 2.0 cables can pass along the HDR data, this should be able to as well.
edit: HDMI 2.0a uses the same connector as HDMI 2.0. I'm pretty sure this will work.
DJ Lushious
Member
Ah, I see what you're saying. So, then the question begs to be asked, who's going to be the first guinea pig?
EDIT - It's me. :-| I'll get it in tomorrow and will report, unless someone already is an owner and can fill us in.
DJ Lushious
Member
The switch works. The only catch is after switching back to the TV HDMI, I had to turn HDR back on. I have to do some more testing to see how it works for, say, switching in the middle of an HDR game, like Deus Ex. I bought a new entertainment center and am in the middle of disassembling everything.Ah, I see what you're saying. So, then the question begs to be asked, who's going to be the first guinea pig?
EDIT - It's me. :-| I'll get it in tomorrow and will report, unless someone already is an owner and can fill us in.
Awesome, thanks for testing! A switch would be much cheaper than a HDR-compatible switch...
blastprocessor
The Amiga Brotherhood
Doesn't surprise me this along with lack of UHD BluRay support and first party content. Sony are on a roll this generation.
infinityBCRT
Member
So even just being in the PS4 menus, you need to switch HDR back on? Lame. But I guess its the best solution now. Thanks for testing this lol. I will definitely get this setup when I get my PSVR in a few months
also, please post a picture of your setup. I need to visualize this lol.
DJ Lushious
Member
To reiterate, this is the switch I purchased from Amazon, thanks to Ghost Lynx. Here's my full review:
The build quality on this switch is quite nice. It's built out of a very sturdy metal that is textured. It has a bit of weight to it, for being so small. In addition, the button has a good travel and click to it. The HDMI input/output ports are quite tight. More like snug. It took a bit more effort to plug in a cable than a normal HDMI port. This left me with confidence that the cables aren't going anywhere!
My only complaint is that it does not have any mounting holes in it. It is a solid box. I had to double up a zip-tie and wrap it around the box to mount it.
Last night I did some testing with Deus Ex: Mankind Divided. There's definitely going to be some option juggling if going from an HDR game to a non-HDR game (and back). As I mentioned above, the settings for HDR do need to be mucked with after switching. The odd thing about Deus Ex, however, was that it let me keep the HDR option on in the Video menu. I had to flick it on and off, depending on which source it was going to. However, the switch's main purpose, for me, is getting the HDTV back to HDR after playing a PS VRSo even just being in the PS4 menus, you need to switch HDR back on? Lame. But I guess its the best solution now. Thanks for testing this lol. I will definitely get this setup when I get my PSVR in a few months
also, please post a picture of your setup. I need to visualize this lol.
I still feel the box is worth the money. It absolutely makes switching from the HDTV to the PS VR seamless, without worrying about wear-and-tear on the ports or having to constantly squeeze into a tight spot behind the media center.
For reference, here is my PS4 HDMI chain:
PlayStation 4 > Switch >
- Pioneer SC-95 AVR > Vizio P65-C1
- PS VR Breakout Box > Vizio P65-C1
Seriously. This is a mess.
To reiterate, this is the switch I purchased from Amazon, thanks to Ghost Lynx. Here's my full review:
The build quality on this switch is quite nice. It's built out of a very sturdy metal that is textured. It has a bit of weight to it, for being so small. In addition, the button has a good travel and click to it. The HDMI input/output ports are quite tight. More like snug. It took a bit more effort to plug in a cable than a normal HDMI port. This left me with confidence that the cables aren't going anywhere!
My only complaint is that it does not have any mounting holes in it. It is a solid box. I had to double up a zip-tie and wrap it around the box to mount it.
Last night I did some testing with Deus Ex: Mankind Divided. There's definitely going to be some option juggling if going from an HDR game to a non-HDR game (and back). As I mentioned above, the settings for HDR do need to be mucked with after switching. The odd thing about Deus Ex, however, was that it let me keep the HDR option on in the Video menu. I had to flick it on and off, depending on which source it was going to. However, the switch's main purpose, for me, is getting the HDTV back to HDR after playing a PS VR
I still feel the box is worth the money. It absolutely makes switching from the HDTV to the PS VR seamless, without worrying about wear-and-tear on the ports or having to constantly squeeze into a tight spot behind the media center.
For reference, here is my PS4 HDMI chain:
PlayStation 4 > Switch >
- Pioneer SC-95 AVR > Vizio P65-C1
- PS VR Breakout Box > Vizio P65-C1
Thanks for testing this out, i ordered one off Amazon UK for £19 after you said the other day it worked.
My only gripe is using two of the HDMI ports on my TV, so i was thinking of getting a cheap £6 switch to put my WiiU & Now TV box on freeing up a port on the TV.
Warnen
Don't pass gaas, it is your Destiny!
I've come up with a solution. Getting a PS4 pro next month, just gonna hook up my current PS4 as vr only. Using 2 inputs as is (swapping hdmi). I'll just keep my old PS4 instead of trading it in for the few $$ I'll get.
But really it's insane they fucked this up so much...
But really it's insane they fucked this up so much...
wait, so you're going to run your VR games on the original console? but you'll be missing out on the Pro VR improvements